Table of Contents
Advertisement
NLSet up and connect
water drain hose to direct excess
condensation water into the waste
water.
Comments
†Use this appliance with the
supplied water drain hose. If you
connect the water drain hose
→
Page 14 , you do not have to empty
the condensed water container regularly
→ Page 33 † †You can use this optional
→ †Accessories", Page 29 order
from customer service.
Connect water drain hose
If you do not want to empty the
condensed water container of the device
regularly, connect the water drain hose.
PAY ATTENTION!
If the device is used without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
Before using the device, connect the
▶
condensate hose or the drain hose
in a professional manner.
Requirements
†The device and its accessories
are unpacked.
→ †Unpacking device", Page 12
†The appliance is on the installation
place set up.
→ †Installation site
requirements", page 13
14
Pull the condensate hose from
1.
the connection.
The condensate hose is connected to
the connection at the factory.
Remark:When removing the
condensed water hose, liquid
may escape from the
connection.
Push the condensate hose onto the
2.
holder.
Advertisement
Table of Contents
