Table of Contents
Advertisement
en Appliance care
¡ After a lengthy period of use, the
appliance reminds you to run the
basic appliance care programme.
Before the programme starts or
after the programme has ended,
the display shows the notification
"CrE" . This notification appears re-
peatedly until you have run the ba-
sic appliance care programme
through to the end.
Requirements
¡ The appliance care programme is
ready. → Page 35
¡ The appliance care programme is
called up. → Page 35
Pour approx. 1.5 litres of hot
1.
mains water into the condensation
container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press Start/ Reload .
3.
a The appliance care programme
starts and a signal tone sounds.
a "End" appears on the display and
a signal tone sounds once the ap-
pliance care programme has
ended.
Pull out the condensation con-
4.
tainer horizontally and empty it.
If you drain the condensation using
5.
the drain hose, remove the stopper
from the underside of the condens-
ation container and insert it into
the recess in the top of the con-
densation container. → Page 35
Insert the condensation container
6.
so that it locks into place.
Switch off the appliance.
7.
→ Page 30
36
15.4 Running the intensive
appliance care pro-
gramme
You can run the intensive appliance
care programme to remove any stub-
born dirt deposits in the appliance
and odours after a downtime of more
than one month.
Notes
¡ The intensive appliance care pro-
gramme runs for approximately 4
hours and must not be cancelled.
¡ When you run the intensive appli-
ance care programme, you need
the original appliance care product
→ Page 28.
Starting the intensive appliance
care programme
Requirements
¡ The appliance care programme is
ready. → Page 35
¡ The appliance care programme is
called up. → Page 35
Press
.
1.
a "CP2" and the programme dura-
tion alternate on the display.
Pour a bottle of the appliance care
2.
product and approx. 1.5 litres of
hot mains water into the condensa-
tion container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
3.
so that it locks into place.
Press Start/ Reload .
4.
a The appliance care programme
starts and a signal tone sounds.
a After around 3 hours, the appli-
ance pauses the appliance care
programme and the remaining pro-
gramme duration flashes on the
display.
Advertisement
Table of Contents
