Table of Contents
Advertisement
Malfunction
device pauses,
but the drum
running.
wrinkling.
Condensation water in the
condensed water reservoir
voir, although the water
drain hose is attached
locks.
Program does not start.
The program duration
changes during
drying.
Pump sound.
Cause and Troubleshooting
Cooling process active.
No error - no action required.
▶
The load quantity is too high.
Pay attention to the maximum load of the
▶
→ †Programs", Page 26 †
The laundry is left in the drum for too long after drying.
Remove the laundry from the drum immediately after
1.
drying.
Spread out the items to let them cool.
2.
Unsuitable program set for the type of fabric.
Set the appropriate program for the type of fabric.
▶
→ †Programs", Page 26
Easy care textiles dried too long.
→
†Change drying target", page 25 †
▶
→ †Adjust drying target", Page 25 †
▶
Anti-crease not activated.
Activate the anti-crease program.
▶
→ †Buttons", Page 23
The device uses condensed water for automatic self-
cleaning.
No error - no action required.
▶
Water drain hose is not connected correctly.
Make sure that the water drain hose is connected
▶
correctly.
→
†Connecting the water drain hose", page 14
Child lock is activated.
→ †Deactivate child lock", page 34
▶
Start/ Pausewas not pressed.
Press
Start/Pause .
▶
No program set.
→ †Set program", page 30 †
1.
→ †Starting the program", Page 31 †
2.
The program sequence is electronically optimized. This
may lead to changes in the program duration.
No error - no action required.
▶
Condensate pump active.
No error - normal operating noise.
▶
TroubleshootingNL
45
Advertisement
Table of Contents
