Table of Contents
Advertisement
NLCleaning and maintenance
Push in the condensed water
6.
container until it locks into place.
Turn off the device.
7.
→ †Switch off the device",
page 31
aThe device maintenance has been
fed.
Remark:If the condensed water is
drained away with the drain hose,
enter the
→ †Preparing the condensate
container for device maintenance",
page 37 the steps mentioned in the
reverse order after simple or intensive
device maintenance.
16 Cleaning and care
loves
Carefully clean and maintain your device
to ensure that it continues to function
properly for a long time.
Remark:More information can be
found in the digital operating
instructions by scanning the QR code
in the table of contents or on
www.bosch-home.com.
42
16.1 Cleaning and maintenance
tips
The housing and
the operating
elements only
with water and a
damp cloth
take.
Delete immediately
all detergent
residues, spray
skin remnants or
residual
aunts.
The door of the
device after
leave use open.
16.2 Humidity sensor
The humidity sensor of this appliance
determines how damp your laundry is
during drying. Depending on the
residual moisture of the laundry, the
appliance changes the duration of the
automatic program.
Clean Humidity Sensor
Over time, residues of limescale,
detergents and care products can
form on the humidity sensor. Clean
the humidity sensor regularly.
PAY ATTENTION!
Hard or rough objects can damage
the humidity sensor.
Do not use hard or rough objects,
▶
abrasives or steel wool for cleaning.
Remark:If you do not clean the device
as described, the device function may
be impaired.
This keeps
these parts
clean and hygienic
nic.
Recent deposit
gene can make
lighter and sun-
of the remains
den removed.
The residual water can
evaporating and
odor formation in
the device
is reduced
third.
Advertisement
Table of Contents
