4.3 Installation site
requirements
PAY ATTENTION!
If the device is tilted more than 40°,
residual water can run out of the
device and cause material damage.
Carefully tilt the device.
▶
Transport the device upright.
▶
Freezing residual water in the device
can damage the device.
Do not place and use the device in
▶
frost-sensitive places or outdoors.
If the device is used immediately after
transport, the refrigerant in the
device can cause damage to the
device.
Let the device rest for two hours
▶
immediately after transport before
using it.
installation site
On the floor
Requirements
The device on
a clean, ef-
fen and fixed on-
place surface.
The device
set
→ Page 16 †
Set up and connect
installation site
in a laundry
drying column
on a wall
4.4 Water drain hose
During drying, condensation is
created that your appliance uses for
automatic cleaning. Use the
Requirements
The device al-
borrow with the
original connection
set of the drug
ger manufacturer in
a washer-dryer
to set up a column.
→ †Accessories",
Page 29
→ †Accessories",
Page 29
This device al-
borrow a washing
machine from the-
same manufacturer
place. The
depth and width
of this appliance
with
the measurements
of the washing machine
china match
man.
The washer-dryer column
do not place on
a platform.
no snakes
between wall and
clamping device
man.
NL
13