In These Situations
Disconnecting Wi-Fi Direct (Simple AP) Connection
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1. Select
on the printer's home screen.
To select an item, use the
2. Select Wi-Fi Direct.
The Wi-Fi Direct information is displayed.
3. Select Start Setup.
4. Select
.
5. Select Disable Wi-Fi Direct.
6. Follow the on-screen instructions.
Related Information
"Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID" on page 97
&
Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID
When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from
Direct > Start Setup >
>
Connecting a Smart Device and Printer Directly (Wi-Fi Direct)
u d l r
buttons, and then press the OK button.
, and then the following menu items are displayed.
97
>
Changing the Wi-Fi Direct (
> Wi-Fi
...