Champion 201110 Operator's Manual page 36

9200w electric start generator
Table of Contents

Advertisement

EMISSION-RELATED PARTS INCLUDE THE FOLLOWING: (using those portions of the list applicable to the
engine)
Systems covered by this
warranty
Fuel Metering System
Air Induction System
Ignition System
Exhaust Gas Recirculation (EGR)
System
Air Injection System
Catalyst or Thermal Reactor
System
Particulate Controls
Miscellaneous items used in
Above Systems
Evaporative Controls
TO OBTAIN WARRANTY SERVICE:
You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original
purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to
sell and service that CPE product during his normal business hours. Alternate service locations defined in Section (3)(f) above must be
approved by CPE prior to service. Claims for repair or adjustment found to be caused solely by defects in material or workmanship will not
be denied because the engine was not properly maintained and used.
If you have any questions regarding your warranty rights and responsibilities, or to obtain warranty service, please write or call
Customer Service at Champion Power Equipment, Inc.
Carburetor and internal parts (and/or pressure regulator or fuel injection system), Air/fuel ratio
feedback and control system, Cold start enrichment system.
Controlled hot air intake system, Intake manifold, Air filter.
Spark plug, Magneto or electronic ignition system, Spark advance/retard system.
EGR valve body, and carburetor spacer if applicable, EGR rate feedback and control system.
Air pump or pulse valve, Valves affecting distribution of flow, Distribution manifold.
Catalytic Converter, Thermal Reactor, Exhaust Manifold.
Traps, Filters, Precipitators, and any other device used to capture particulate emissions.
Vacuum, Temperature, and time sensitive valves and switches, Electronic Controls, Hoses, Belts,
Connectors, and Assemblies.
Fuel Tank, Fuel Cap, Fuel Lines (for liquid fuel and fuel vapors), Fuel Line Fittings, Clamps, Pressure
Relief Valves, Control Valves, Control Solenoids, Electronic Controls, Vacuum Control Diaphragms,
Control Cables, Control Linkages, Purge Valves, Gaskets, Liquid/Vapor Separator, Carbon Canister,
Canister Mounting Brackets, Carburetor Purge Port Connector.
Champion Power Equipment, Inc.
12039 Smith Ave.
Santa Fe Springs, CA 90670
1-877-338-0999
Attn.: Customer Service
tech@championpowerequipment.com
Parts Description

Advertisement

Table of Contents
loading

Table of Contents