FIXED 60 80 AND ROTATING 60 VERTICAL COOLING DISPLAY Congratulations for purchasing this top end professional equipment! You have chosen equipment that combines optimum technical properties with extreme user comfort. We want you to get the greatest possible satisfaction out of this equipment. 1.
Page 5
5. FUNCTIONING / MANIPULATION a) Installation / Assembly : - Place the equipment on a stable surface. - Position the accessories - A distance of 10 cm from the partition or the wall is considered enough. - Never place the device near a wall or near a partition made of combustible materials even if it is very well isolated.
Page 6
Starting - Press on the on/off switch (n°3 on picture) to start the unit. The electronic thermostat turns on. - Wait for the unit to be at the right temperature (stop of the compressor). - Press on the light switch (n°2 on picture) to start the light and activate rotating plate (rotating model) Temperature setting The electronic thermostat is preset in factory.
d) Breakdown / repair : In case of breakdown or of damaged part, please call your after-sales service and confide any technical operation to a qualified person. When you contact the after-sales service of your distributor or your store, provide him with the complete reference of your device (commercial name, type and serial number).
Page 8
8. GUARANTEE Conditions of guarantee The guarantee applicable to any device is the commercial guarantee of the distributor or the retailer. Please contact the store where you bought your device to know the precise conditions. The guarantee grants no right for damages. The dispositions which follow are not exclusive of the profit of the legal guarantee planned by articles 1641 and following ones of the Civil code relative to the defects and the latent defects.
Page 9
9. MAINTENANCE GUIDE ANOMALIE CAUSE REMEDE Thermostat stopped Switch on position « on» The display does not start plug not plugged Check the plug The display does not stop No refrigerating power Clean the condenser The display does not Remove foreign or Helicoïd ventilator is blocked regulate Eventually replace the ventilator...
Need help?
Do you have a question about the SNE/RN-B7-R2 and is the answer not in the manual?
Questions and answers