Download Print this page

Diamond SX/80E Instructions For Use And Installation

Electric slamanders

Advertisement

Quick Links

11/2011
Mod: SX/80E
Production code: SEF 800 B

Advertisement

loading

Summary of Contents for Diamond SX/80E

  • Page 1 11/2011 Mod: SX/80E Production code: SEF 800 B...
  • Page 2 INSTRUCTIONS FOR USE AND INSTALLATION ELECTRIC SALAMANDERS SEM 600 /SEM 800 / SEF 800 Made in France November 2011...
  • Page 3: Security Instructions

    SALAMANDERS SEM 600/SEM 800/SEF 800 Congratulations for the acquisition of this upmarket appliance made in France. You chose an appliance which alloys the best technical qualities with a big user- friendliness. We wish you the biggest contentment 1. SECURITY INSTRUCTIONS Please respect these instructions scrupulously to avoid any risk of fire, electric shock, scald or other wounds and damage.
  • Page 4: Contents Of Cardboard Packaging

    2. CONTENTS OF CARDBOARD PACKAGING Device: a salamander Accessories: - A tray - A grid - A grid with handles (SEF 800) - A quartz tubes protection grid (only for quartz salamanders) - The present note See exploded views for each models at the end of the document 3.
  • Page 5 Control pilot light Commutator 5. FUNCTIONING / MANIPULATION a) ) stallation / assembly: - Unpack carefully the device of its packaging. - Place the salamander on a plane and heatproof surface. - Never place the device near a wall or near a partition makes of combustible materi- als even if it is very well isolated.
  • Page 6 b) First starting: During the first use, warm your machine up outside to evacuate residual smokes of manufacturing oil from the metallic parts. This may emit a slight smell for a few mo- ments. First cleaning Clean the device before the first use. (See 6. Cleaning) Connection of the device - Check that the tension and the frequency of the electricity network suit to the values indicated on the descriptive plate.
  • Page 7: Cleaning And Maintenance

    Putting on Turn on the commutator control knob (n°2 on picture) on wished position according to desired cooking power. The pilot light (n°1 on picture) ignites The cooking with infrared radiation (quartz tube and glass ceramic) do not need pre- heating.
  • Page 9 Wires colours correspondence Phase 1 Brown Phase 2 Black Phase 3 Grey Neutral Blue Earth Yellow-Green The equipotential connection marked by this symbol must be linked with the equipotential conductive connection of your installation by means of a minimum con- duction of a 2.5 mm²...
  • Page 10 UARANTEE Conditions of guarantee The guarantee applicable to any device is the commercial guarantee of the distributor or the retailer. Please contact the store where you bought your device to know the precise conditions. The guarantee grants no right for damages. The dispositions which follow are not exclusive of the profit of the legal guarantee planned by articles 1641 and following ones of the Civil code relative to the defects and the latent defects.
  • Page 17 Nomenclature SEM 600 Résistance blindée Spare parts SEM 600 Armoured heating element...
  • Page 19 Nomenclature SEM 600 Tube quartz Spare parts SEM 600 Quartz tube...
  • Page 21 Nomenclature SEM 600 VC Spare parts SEM 600 VC...
  • Page 23 Nomenclature SEM 800 Résistance blindée Spare parts SEM 800 Armoured heating element...
  • Page 25 Nomenclature SEM 800 Tube quartz Spare parts SEM 800 Quartz tube...
  • Page 27 Nomenclature SEM 800 VC Spare parts SEM 800 VC...
  • Page 29 Nomenclature SEF 800 Résistance blindée Spare parts SEF 800 Armoured heating element...
  • Page 31 Nomenclature SEF 800 Tube quartz Spare parts SEF 800 Quartz tube...

This manual is also suitable for:

Sef 800 bSem 600Sem 800Sef 800