Cleaning The Body And Control Panel; Cleaning The Water Intake Filters; Draining Remaining Water And Cleaning Pump Filter - Technika TFL7W User Manual

MAINTENANCE & CLEANING

Cleaning the Body and Control Panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as
necessary, and dry with a soft cloth. Use only a soft and damp cloth to clean the control panel.

Cleaning the Water Intake Filters

There is a filter at the end of each water intake
valve at the rear of the machine and also at the
end of each water intake hose where they are
connected to the tap. These filters prevent
foreign substances and dirt in the water to
enter the washing machine. Filters should
be cleaned as they do get dirty.
1. Close the taps.
2. Remove the nuts of the water intake hoses
to access the filters on the water intake valves.
Clean them with an appropriate brush. If the
filters are too dirty, remove them from their
places with a pliers and clean in this way.
3. Take out the filters on the flat ends of the
water intake hoses together with the gaskets
and clean thoroughly under running water.
4. Replace the seals and filters carefully
and tighten their nuts by hand ensuring
there are no leaks.
Draining Remaining Water and Cleaning the Pump Filter
The filter system in your machine prevents solid items such as buttons, coins and fabric fibres clogging the
pump impeller during discharge of washing water. Thus, the water will be discharged without any problem
and the service life of the pump will extend. If the machine fails to drain water, the pump filter is clogged.
Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean
the pump filter.
In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of
the water, water may have to be drained completely.
34