Loading Door Lock - Technika TFL7W User Manual

OPERATION
Progress of the Programme
You can change the auxiliary functions, speed and temperature settings without stopping
the programme flow while the programme is running. To do this, the change you are going
to make must be something that will be carried out after the programme step that is running.
If the change is not suitable, relevant lights will flash 3 times.
If the machine does not proceed to the spinning step, the Rinse Hold function
might be active or the automatic unbalanced load detection system might be
1. SAFETY INSTRUCTIONS
activated due to the unbalanced distribution of the laundry in the machine.
1.1 General Safety Warnings

Loading Door Lock

1. SAFETY INSTRUCTIONS
There is a locking system on the loading door of the machine that prevents
opening of the loading door in cases when the water level is unsuitable.
Loading door light will start flashing when the machine is switched to Pause mode. The machine
1.1 General Safety Warnings
1. SAFETY INSTRUCTIONS
checks the level of the water inside. If the level is suitable, the loading door light will turn off and the
loading door can be opened within 1-2 minutes. If the level is unsuitable, the loading door light will
WARNING:
remain on and the loading door cannot be opened. If you are obliged to open the loading door while
1.1 General Safety Warnings the Loading Door light is on, you must cancel the current programme. See "Cancelling the programme".
Icon
WARNING:
Opening the loading door in case of power failure:
Icon Type
WARNING
In case of a power failure, you can use the loading WARNING:
RISK OF ELECTRIC SHOCK
door emergency handle under the pump filter lid
RISK OF ELECTRIC SHOCK
SYMBOL ISO 7010 W021
to manually open the loading door.
WARNING:
SYMBOL ISO 7010 W021
Before opening the loading door, make sure that
WARNING: WARNING: CAUTION WARNING:
there is no water in the machine to avoid flooding.
IMPORTANT / NOTE
Water may be hot and could cause scalding.
• Turn off and unplug the appliance.
WARNING: WARNING:
• Open the pump filter lid.
WARNING:
• Remove the loading door emergency
handle behind the filter cover with a tool.
WARNING:
• Open the loading door by pulling the loading
door emergency handle downwards.
WARNING:
• Try to pull the handle downwards
again if the loading door is not opened.
• Bring the loading door emergency handle to its
original position after opening the loading door.
30
(continued)
Type
WARNING
CAUTION
IMPORTANT / NOTE
EN - 2
EN - 2
EN - 4
EN - 4
EN - 4
Meaning
Meaning
Serious injury or death risk
Serious injury or death risk
Dangerous voltage risk
Dangerous voltage risk