Table of Contents
Advertisement
PREPARATION
Displayed Programme Time
You can see the programme duration on the display of your machine while selecting a programme.
Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load
conditions, fluctuations in power supply, water pressure and programme settings, the programme
duration is automatically adjusted while the programme is running.
Special Case
At programme start of Cottons and Cotton Eco programmes, display shows the duration of half load,
which is the most common use case. After programme starts, in 20-25 minutes actual load is detected
by the machine. And if the detected load is higher than half load; washing programme will be adjusted
accordingly and programme duration increased automatically. You may follow this change on the display.
19
Advertisement
Table of Contents
