Changing The Selections After The Programme Has Started; Cancelling The Programme - Technika TFL7W User Manual

Changing the Selections After the Programme has Started

Press the Start / Pause to switch the machine to pause mode while a programme is running.
The light of the current programme will flash on the Programme Follow-up indicator,
indicating that the machine has switched to pause mode.
Also, when the loading door is ready to be opened, the Loading Door light will turn off in addition
to the programme step light. Changing the auxiliary function, speed and temperature Depending
on the step the programme has reached, you can cancel or select auxiliary functions. See "Auxiliary
function selection". You can also change the speed and temperature settings. See "Spin speed
selection" and "Temperature selection".
If no change is allowed, the relevant light will flash 3 times.
Adding and removing laundry
1. Press the "Start / Pause" button to pause the machine. The programme follow-up light of
the relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the loading door and add or take out laundry.
4. Close the loading door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press the "Start / Pause" button to start the machine.

Cancelling the Programme

To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be cancelled. End / Cancel light will flash continuously to notify that
the programme has been canceled.
When you turn the Programme Selection knob, the machine will end the programme but
will not discharge the water inside. When you select and start a new programme, the newly
selected programme will start depending on the step the previous programme was canceled in.
For example, the machine may take in additional water or continue to wash with the water inside.
Depending on the step where the programme was canceled in, you may have
to add detergent and softener again for the programme you have selected anew.
OPERATION
31