Table of Contents
Advertisement
Warning
Do not use in the presence of flam-
mable or combustible materials or
explosive gases. Do not use in the
presence of pressurized or sealed
containers—fire or explosion may
result, causing death or severe
injury.
Note
Depress metal tab prior to rotating
knob—the tab fixes knob setting and
prevents inadvertent motion of the
knob.
Metal Tab
1
3
1.
POWER-ON STATUS LAMP: Lit when the unit
power is on.
2.
SPEED CONTROL: Sets shaking speed.
3.
CIRCUIT BREAKER: Push in to re-set unit in the
event of an overload.
4.
TIMER: Set time of an operation up to 1 hour.
Step-by-Step Procedure
1.
Connect cordset to proper electrical outlet as
described in the previous INSTALLATION section.
2.
Check the side arms, clamps and accessories to
make sure that they are securely tightened.
3.
Load the unit with the items to be shaken.
4.
Start with timer knob in 0 or off position and speed
control in off position.
Operation
2
4
11
Advertisement
Table of Contents
