Gira S1 Configuration page 30

Object Name
54 NTP status
Category: Time server
Function: Indicates whether a valid time could be requested by the NTP server.
Description: 1-bit object for display of the status of the last NTP query. If the NTP query was
successful and the system time has been reset as a result or if there was an error
during the previous query, the object is assigned a "1". If the last NTP query was
not successful, the object is assigned a "0".
Object Name
55 SD card error
Category: Data logger
Function: Indicates whether there is currently an error with the SD card.
Description: 1-bit object for signalling an SD card error. When a "1" is assigned to the object,
an SD card error has occurred.
Object Name
56 SD error code
Category: Data logger
Function: Indicates the current error code (0 = no error).
Description: 1-byte object for signalling a microSD card error.
0 = microSD card OK
1 = microSD card full
2 = microSD card not inserted
4 = Fault has occurred in microSD card (e.g. incorrectly formatted)
Object Name
57 Activate data logger
Category: Data logger
Function: Activates (1 = default) or deactivates (0) the logging and indicates the status on
request.
Description: 1-bit object to activate the data logger. When a "1" is assigned to the object, the
data logger is active. If a "0" is assigned to it, it is deactivated.
Object Name
58 Datenlogger Status
Category: Data logger
Function: Indicates whether the data logger is currently recording data.
Description: 1-bit object which reflects the state of the data logger. If the object has a value
of "1", the data logger is active. A "0" means that the data logger is inactive.
Order No. 2089 00
Direction Data width
Read 1 bit
Data type: Boolean
Direction Data width
Read 1 bit
Data type: Boolean
Direction Data width
Read 1 byte
Data type: -
Direction Data width
Write 1 bit
Data type: Switch
Direction Data width
Read 1 bit
Data type: Boolean
Configuration in the ETS
DP type Flags (CRWTU)
1.002 CR-T-
DP type Flags (CRWTU)
1.002 CR-T-
DP type Flags (CRWTU)
20.* CR-T-
DP type Flags (CRWTU)
1.001 CRW--
DP type Flags (CRWTU)
1.002 CR-T-
Page 30