User manual
9.
Lock the floating chassis to the pendulum shaft by fully tightening the eight screws.
IMPORTANT!
Being careful not to damage the bearing spindle
on top of the pendulum shaft, lower the main
floating chassis over the top of the pendulum
shaft.
10.
Apply 3 to 4 drops of the Clearaudio
Art. No. AC068) to the bearing spindle.
Please apply 3 to 4 drps
to the bearing spindle
Pic. 11: Tighten the bearing screws
Made in Germany
Pic. 10 : Removing the wood spacers
Synthetic Bearing Oil
Lock the 8 screws
(also available at
www.analogshop.de
Page 13