The First Time You Use Mobilemapper Cx - Magellan MobileMapper CX Getting Started Manual

Step
20

The First Time You Use MobileMapper CX

Please carefully read the procedure outlined in the table be-
low. This procedure is described in detail in the continuation
of this chapter. Please strictly follow the order in which the in-
structions are given.
Note that the procedure was tested for several popular mobile
phone brands and for a European GPRS operator. The proce-
dure should normally apply for any other manufacturer, phone
model and GPRS operator although this cannot be guaran-
teed.
Task
Ask MobileMapper CX to be
paired with the cell phone.
1
Allow the cell phone to be
2 paired with MobileMapper CX
Re-boot Bluetooth Manager on
3
MobileMapper CX
Establish a Bluetooth link
between MobileMapper CX
4
and the cell phone
Prepare the GPRS connection
5
Establish the GPRS connection On MobileMapper CX:
6
Detail
On MobileMapper CX:
- Start Bluetooth Manager
- Detect the cell phone
- Ask for a paired Bluetooth link
- Enter a PIN code.
On the cell phone, select the appropriate
command and then enter the same PIN code as
in Step 1.
On MobileMapper CX, exit from Bluetooth
Manager and then re-launch this program.
On MobileMapper CX:
- List the cell phone's local services
- Establish a Bluetooth link
- Create a shortcut for future connections.
On MobileMapper CX
- Start creating a new connection icon
- Enter the GPRS call number
- Finish creating the new connection icon.
- Double-tap the new connection icon
- Enter GPRS operator identification data
- Start the GPRS connection.