Go To A Waypoint While Panning; Map Screen Options Menu; Non-Routing Options Menu - Magellan eXplorist GC User Manual

Go To a Waypoint while Panning

1. Pan the cursor until it is over a displayed waypoint.
2. Press MENU.
3. Select GO from the Options menu.

Map Screen Options Menu

The Map Options Menu is accessed by pressing the MENU button while viewing the map. There are
two formats for this menu; routing and not routing. They are slightly different as when you are routing
there are functions you need at your fingertips that are not needed during non-routing situations.
While viewing a Options menu you can quickly go to the bottom of the menu by pressing the ZOOM-
button or to the top by pressing ZOOM+.

Non-Routing Options Menu

New Waypoint
Go
Start Trip
Stop and Save Trip End the recording of the track and saves the trip.
Pause Trip
Resume Trip
Map
Map+Compass
Edit Nav Fields
Edit # of Nav
Fields
Heading Up/North
Up
Reset Trip
Odometer
Reset Trip Time
Map Options
Suspend
Lock Keypad
Power Off
Creates a new waypoint at your current position or pan cursor.
If there is a geocache or waypoint at the point of the pan cursor,
select GO to create a route to that location.
Removes any track information from the map and resets the trip
data, trip odometer and trip timer. Begins recording track.
Pauses the recording.
Resumes the recording.
Sets the Map screen to display the map only.
Sets the Map screen to display the map with a compass overlay.
Allows you to select the type of data to be displayed in the Nav Field.
Allows you to display 0,1, 2, 3, or 4 Nav Fields on the Map screen.
Toggles the display orientation so that the top of the screen is either
your heading or North.
Resets the trip odometer to zero.
Resets the duration time of the trip to zero.
Provides access to customize the Map screen and select what will
be displayed.
Turns off the display and other software features, but the GPS
receiver remains tracking. Press the Power button to resume.
Disables the keypad preventing accidently button presses. Hold the
MENU
button down until the pop-up window disappears to unlock.
Turns the eXplorist GC receiver off.
10