Trouble Shooting - Redline robored G2 Instruction Manual

Trouble Shooting

If eorr occurs, LED indicator on the button will be red flash and there will be voice prompt for the instructions as follows.
Item Fault Prompt
Main brush fault, please
1
clean the main brush.
Side brush fault, please
2
clean the side brush.
Wheel overload, please
clean the wheel assem-
3
bly.
Front bumper fault,
4
please tap the bumper
Please clean the front
5
bumper lens.
Please clean the
6
anti-drop sensors
Please put the machine
7
in a safe place.
Cause
Main brush locked or binded
Side brush locked or binded
Wheel locked or binded
Front bumper locked
Something stick or shaded on
the front bumper lens
Something stick or shaded on
the anti-drop sensors
Machine doesn't in a safe
place
15
Solution
Please dismantle and clean main brush. Pis
remove all fragile objects and cords, clothing,
paper, loose cables, make sure No scattered
items on the ground.
Please dismantle and clean side brush. Pis
remove all fragile objects and cords, clothing,
paper, loose cables, make sure No scattered
items on the ground.
Please check and clean the wheel. Pis remove all
fragile objects and cords, clothing, paper, loose
cables, make sure No scattered items on the
ground.
Please tap the bumper times to clean it
Please clean the front bumper lens
Please clean the anti-drop sensors
Please move the machine and restart it