How To Assemble 2-In-One Water Tank - Redline robored G2 Instruction Manual

Product Maintenance

How to assemble 2-in-one Water Tank

Step 1: Take off the dust bin, unplug the rnbber plug
of water tank and inject water until filling it up,
then plug its lid.
Step 3: Align the mop cloth to the edge of
water tank's bottom, then stick the mop
cloth on water tank and press it flat.
Step 4: Put the 2-in-one water tank into the corresponding
position of the machine. You can replace the original Dust Bin
for your needs.
Handle
Dust Bin
Step 2: Put the dust bin
back in the corresponding
position of water tank.
Mop Cloth
13
Mechanical
Water Tank