Component Install; Product Maintenance; Cleaning Side Brushes; Cleaning Dust Bin And Filters - Redline robored G2 Instruction Manual

Product Operation

Component Install

Rolling baish kit, dust bin kit should be well installed in
the corresponding position (refer to below diagram)

Product Maintenance

Cleaning Side Brush
1. check if side brush is broken or something stacked
2. use mops to clean the side brush
3. if side brush is curly or deform, put them in hot
water for 5 seconds
4. if side brush cannot be used any more, please
change it in time.

Cleaning Dust Bin and Filters

Empty and clean dust bin every time when you use it,
cleaning steps as below:
A. simply wash dust bin in running water after use to
avoid dust blowing in the air which will cause second
pollution.
B. wash primary filter every 15-30 days to maximize
its use life. Do not wash HEPA filter.
C. before install the filters make sure they are dry.
D. primary filter and HEPA filter are changeable
accessories. Maximum life span for HEPA is 24
months.
E. Do not bake the filters under intense sunlight.
10