2 megapixel full hd cmos box ipcamera icr, dwdr, 2 megapixel full hd cmos box ipcamera soft d/n, dwdr, 2 megapixel full hd cmos box ipcamera icr, dwdr, 3 megapixel full hd cmos box ipcamera icr, wdr, 5 megapixel full hd cmos box ipcamera icr, dwdr (97 pages)
Introduction Thank you for purchasing a Grundig product. Before installing or connecting the product, please read first the following documents which you can find in printed form in the product package: - Legal Disclaimer - Safety Instructions - Installation Manual and/or Quick Guide for the respective product model Further information about the product like Data Sheets, CE Documents, etc.
1. Overview 1.1 Range of Application The network cameras with powerful image processing capacity may be applied at various public places such as mall, supermarket, school, factory and workshop, as well as in environments requiring HD video image such as bank and traffic control system, as shown below: Figure 1.1 1.2 Product Description An IP camera is a digital online surveillance camera embedded with Web server and capable of...
1.3 Operation Environment Operating system: Windows 7/Windows 8/Windows 2008 (32/64-bit), Windows 2003/Windows XP/Windows 2000 (32-bit) CPU: Intel Core Duo II dual-core processor or higher Memory: 1G or more Video memory: 256M or more Display: 1024 × 768 or higher resolution IE: IE 10 or higher version English...
2. Device Connection IP camera can be connected in two ways: 1. Connection to PC Connect IP camera to PC via straight-through network cable, with power input connected to a DC 12V adaptor, and set the IP addresses of the PC and IP camera in one network segment. The IP camera will communicate with PC within one minute after being powered on if the network operates normally.
3. Setting IP address via Device Config Tool Devices that communicate with each other on the Internet must follow the constraints of the network protocol. For example, the PC and IPC are in the same local area network, and the setting IP of the IPC must be in the same network segment as the IP of the PC in order to communicate normally.
Page 9
Figure 3.2 Config tool Note: The default IP of the camera is 192.168.1.100, the default account is admin, and the default password is admin. Step 3: As shown in Figure 3.2, select the corresponding device, enter the account and password, edit the corresponding network information, and click Modify to save the information.
4. IE Log in 4.1 Access to IPC web port Use Device Config Tool to search the IPC of the current network. Click on the searched IP and log in to the camera with IE browser as shown in Figure 4.1. Figure 4.1 Config tool search You can also directly open the IE browser and enter HTTP://ip:web port.
Page 11
3. It is forbidden to repeat and continuous characters exceeding 4 digits. 4. It is forbidden for the continuous keys of the keyboard pattern to exceed 4 digits. Figure 4.2 Login Set a new password, click OK to save, the interface as shown in Figure 4.3 will pop up. You can check to choose the corresponding password retrieval method, or cancel the setting directly without checking, and the password retrieval function will not be enabled.
③ Super code (Not recommended): Use the super verification code to modify the main user’s password. A super verification code can be calculated by current camera's Mac address and the camera system time to modify the main user's password. However, the camera's Mac is broadcast on the network, and the camera system time can be obtained directly when logging in to the Web and using Super code to modify the master user password.
Figure 4.5 Security questions 4.4.2 Key File When set up the password authentication questions in initial login, you can turn on the key search and modify password function and prompt to download the key file certificate.txt. Open the password retrieval interface, switch to the Certificate of authorization mode, and the interface is converted as shown in Figure 4.6.
calculated based on certain rules. By filling in the verification code, the main user’s password can be modified. Figure 4.7 Super password 4.5 Password Expired Using the same password for a long time poses a great security risk. For this reason, the program will record the system time of the last password modification.
Page 15
Figure 5.1 Plug-in Note: Programs without plug-ins are supported. When using Safari 12 and above, Chrome57 and above, Firefox 52 and above, Edge 41 and other browsers for web access, the plug-in installation steps can be ignored. English...
6. Preview 6.1 Live After the login is successful, the web terminal enters the login preview interface, which is shown in the following figure. Note: The functions of different products are different, please refer to the actual situation. Figure 6.1 Code stream switching menu: the upper left corner can switch the image quality of the current preview interface.
PTZ Setting: Open the pan/tilt operation setting and re-adjust the focus of camera. Exit: Exit the current login Recording alarm status: Prompt the alarm and recording status of camera, please refer to section 6.2 for details Stop/Play: Open and close the current stream preview Original Proportions: Display the current preview image in original proportions Stretch: Display the current preview image in a way that fills the display area Full Screen: Display the current preview screen in full screen, you can double-click the screen to...
Page 18
: The SD card is in an abnormal state, please check the SD card. : The camera is in motion alarm, but motion alarm recording is not enabled. : The camera is in motion alarm, and motion alarm recording is performing. : The camera is in IO alarm, but IO alarm recording is not enabled.
7. Playback The camera not only needs to allow us to see the real-time image, but also needs to save the image information so that it can be retrieved and viewed when needed. 7.1 General Playback The playback function is mainly composed of General video search and AI search functions. The following figure shows the video search.
Forward by One Frame:Play one frame of image every time you click Record:Manually record the current preview stream Capture:Manually capture the picture of the current stream Download:Download the currently searched video speed:Playing speed. Support speed adjustment like 1/8, 1/4, 1/2, 1, X2, X4, X8 Audio:Turn on/off, adjust the sound of playback stream Playback progress bar: The time bar below shows the current playback progress bar in different colors according to the search results.
Page 21
Figure 7.2 Search Mode: Switch the search mode. Current search mode is AI-Face Detection Start time: Set the start time of search End time: Set the end time of search Face Attribute: The face attribute is not clicked by default. When enabled, it will only search for the face snapshot pictures when the facial attribute detection is started.
according to Search and Compare functions. You can double-click the picture to see the playback for a short period before and after the detection. 7.3 Playback Searched by Human & Vehicle Similar to the face capture function, the camera can distinguish between people or cars, and record them, so as to search for the required records.
can alarm the target of human & vehicle only. Besides, the picture or video is recorded, which is easy to search and view. The interface is shown in the figure below. Figure 7.4 Search Mode:Switch the search mode. The current search mode is AI-PID&LCD. Start time:Set the start time of search.
Page 24
Figure 7.5 Search Mode:Switch the search mode. The current search mode is AI-Repeat customer. Start time:Set the start time of search. End time:Set the end time of search. Minimum time interval:Set the minimum interval between two captures of the same target to increase search accuracy.
order is available. You need to click Refresh to refresh. Refresh:Refresh the IE sort according to Minimum number of occurrences and Sort Type. Search Result Secondary Display Area:According to the information selected in the search result display area, the capture of the selected target is displayed in the form of an event list. Click Play button to switch to the corresponding quick playback.
Page 26
Import type:Select the import type. There are by group and by face. The former is to take all persons in the existing group as the detection object and search for matching results. The latter is to select people in a certain group to search for matching results. Alarm Group:When selecting by group, search for face attendance results based on database grouping.
Page 27
Figure 7.9 Click Delete to remove the selected face from the queue, or click All to select all faces. Click Cancel to close the window. Search:Search face attendance information Search Result Display Area:Display the search results in the form of a table on the upper right side.
Page 28
Export:Click to export the results to the computer. Attendance results: “←” means leaving early, “→” means late, “←”“→” means both leave early and late, “√”means normal attendance. “○” means absence. The green line indicates the start and end time of attendance. Search Result Secondary Display Area:Click on a person, and detailed time information will be displayed at the bottom right.
8、Remote Setting 8.1 Live The Live is to set the location where the channel name, device time, CC and other intelligent function statistics data and the image are superimposed. The interface is shown in the figure below. Figure 8.1 Name:Set the channel name that camera shown on the OSD. Date Format: Set OSD date format displaying.
8.2 Image Control Image control is to directly control and modify graphics parameters, such as color to black mode, wide dynamic, backlight supplement, etc. The interface is shown as below. Figure 8.2 IR-CUT Mode:Set the day/night switching mode of the camera, a total of 5 modes. Automatic mode: Automatically control switching mode.
Page 31
Mirror:Set the mirror mode to adjust the picture effect, there are 4 modes. Disable: Turn off the mirror mode. Vertical:Mirror mode in vertical direction, which makes the images of the screen interactive up and down. Horizontal:Mirror mode in horizontal direction, which makes images of the screen are interactive left and right.
Automatic mode: The camera automatically selects the noise reduction according to the algorithm. OFF:Disable noise reduction. Manual: Reduce noise manually. Save:Save parameters. Default:Restore parameters to the default. Refresh:Re-obtain parameters. 8.3 Video Cover In actual use, some areas are not suitable for monitoring and recording. Those areas can be hidden in the video through this function.
can be set to a different frame rate and resolution with the non-selected area. Figure 8.4 Bitrate: Select the bitrate to be set. Region ID: Select the region ID, up to eight regions can be set. Enable Region: Turn on. ROI Level: Set the image quality in the area.
Figure 8.5 Resolution: The resolution of the recorded image. FPS: The number of frames recorded by IPC. Video Code Type: Decoding type, there are H264, H265, H264+, H265+ and MJPEG (MJPEG mode only exists in sub-stream mode) Video Code Level: Video quality level, including Bestline, Main Profile and High Profile (for H265, only Main Profile is available).
Page 35
Figure 8.6 Stream Mode: The video stream to be saved in the SD card in recording mode. The default is the main stream. Record: Check to enable recording. PreRecord: If this option is enabled, the IPC will start recording a few seconds before the alarm event occurs.
8.6 Event 8.6.1 Setup 8.6.1.1 Motion Detection This menu allows you to configure motion detection parameters. When motion is detected, a series of alarms are triggered, such as sending an email alert with additional images from the camera (if this option is enabled), pushing notifications via mobile APP. Figure 8.8 Drag the left mouse button to delimit the detection area in the right window.
Figure 8.9 Enable:Turn on/off sound detection. Rise:The alarm will be triggered only when the volume rises steeply. Rise Sensitivity: Fine-tuning sound rise sensitive detection, and the sensitivity can be set to 1- 100. The larger the value the lower the sound detection threshold. Sound Intensity:Coarse-tuning sound rise sensitive detection, and the sensitivity can be set to 1-100.
Page 38
Figure 8.11 Latch Time:Set the external alarm triggering time when motion is detected. Post Recording:Set the duration of the device's recording after the event occurs. There are 5s, 10 s, 20s, and 30s optional. The default recording time is 5s. The max is 30s. Send Email:Set the camera to send email to your mailbox when it detects motion.
Page 39
Figure 8.13 Alarm Type:Three types are optional:Normally open, Normally close and Off. Select a type that matches your sensor type, or select "Off" to turn off the sensor trigger function. Latch Time:The time that the camera IO alarm continues to alarm after the alarm ends. Post Recording:Set the duration of the device's recording after the event occurs.
Page 40
8.6.2.3 Sound Alarm Figure 8.15 Latch Time:Set the external alarm triggering time when motion is detected. Post Recording:Set the duration of the device's recording after the event occurs. There are 5s, 10 s, 20s, and 30s optional. The default recording time is 5s. The max is 30s. Send Email:Set the camera to send email to your mailbox when it detects sound.
8.7 AI 8.7.1 Setup To use AI smart alarm, you need to enable the corresponding alarm function in the Setup menu first. This function requires the computing power of the camera. Due to the limitation of the camera's performance, HM and other functions can be enabled at the same time, whereas PID\LCD\SOD, FD, PD&VD, CC, CD, and QD cannot be enabled at the same time.
Page 42
red small box next to the digital ID of the region box to drag or stretch the region. ② Line: Rule Type:There are two types, A→ B and B → A. Draw a regular line from A to B (or B to A) on the area.
Page 43
Picture Quality:The picture quality of face capture can be set to 0-180. Min Pixel:The lowest pixel setting of people. When the recognized object is smaller than the pixel, no alarm is generated accordingly. It can be set to 64-1080. Note: the figure recognition function recognizes the whole picture as a 1080p picture.
Page 44
Dynamic Marking: choose to show or don’t show the track Snap Mode:There are three recognition modes, default mode, real-time mode and interval mode Default:The default optimal mode. When human or vehicle enter the monitoring area, the camera will always capture. After a human or vehicle leaved the monitoring area, the best and clearest of the captured images in this period will be saved in NVR.
Page 45
Customize: Select this mode and a region box will appear on the small window. Click the red small box next to the digital ID of the region box to drag or stretch the region. (Noted:Trigger PD&VD,"S" will appear on the channel, identify the pedestrian line in green box, and identify the vehicle line in blue box.
Page 46
Rule Switch:The switch of each rule. Rule Type:Setup to each rule, A->B means can detect A to B direction moving, B->A means can detect B to A direction moving, A ←→B means can detect two directions moving. PID (Perimeter Intrusion Detection): click on the area, draw a square area of four points, and then set it as a perimeter intrusion detection rule.
Page 47
enabled, the only detect the alarms triggered by human or vehicles, but need to consume more CPU of IPC. If it is not turned on, all objects passing through the line will be detected. Rule Number:Max set 4 rule number. Draw a rule area on the area map, and click to the next few rules, then you can draw rules on the area map.
Page 48
Sensitive:The sensitivity of triggering SOD can be set as 1-4. The larger the value is, the more sensitive the SOD alarm is. The default sensitivity of SOD is set as 3 Dynamic Marking: choose to show or don’t show the track ...
Page 49
Dynamic Marking: choose to show or don’t show the track Type:There are three types. Motion, person, Vehicle. Alarm Number: Count the number of alarms, set the value from 1-255 Start Time: Set alarm start time End Time: Set alarm end time ...
Page 50
detection area. Rule Switch:The switch to rule. 8.7.1.8 CD – Crowd Density Detection Crowd Density (CD) detection, the way of identifying the human head through the human figure recognition function, recognizes the number of people in the monitoring area. The alarm will be triggered when the number of people exceeds the preset value.
Page 51
② Customize: Select this mode and a region box will appear on the small window. Click the red small box next to the digital ID of the region box to drag or stretch the region. Rule Number:Only one rule is allowed to be turned on. The entire screen has been checked in the default area.
recognition function can recognize the entire image as a 1080p image. Max Detection Number: the max number of Personnel Detection can be set from 1-100 Max Pro Time: The alarm will be triggered if no one has left the area for more than the set time,can be set to 1-3600 ...
Page 53
list, red represents the bock list, and colorless represents stranger. Group Name:Edit and modify the group name, and the specific group name will be prompted when the alarm is pushed. Delete:Group delete function, the first 3 groups are not allowed to be deleted. Edit:Open the picture settings for group reference, please refer to following figure for more details.
8.7.3 Alarm The alarm can be realized by camera's AI function. It can be divided into 3 categories according to the implementation mode: The first category includes FD, AD, PD&VD, PID, LCD, SOD, CC, CD, QD. When the camera detects an alarm event, it directly triggers an alarm.
Page 55
Post Recording:The duration of recording after the alarm ends. Note: At the same time, the effective time is controlled by the schedule. Send Email:Whether the camera sends an email when it alarms. Note: At the same time, the effective time is controlled by the schedule. FTP Picture Upload:The camera sends the picture to the associated FTP server when it alarms.
Page 56
Figure 8.29 Group Name:Edit and modify the group name, and the specific group name will be prompted when the alarm is pushed Enable:Switch to enable the alarm. Policy:Alarm policy, the first 3 groups are not allowed to be modified. Other groups can be customized as Allow、Deny.
Page 57
This setting is not controlled by Enable. FTP Picture Upload:The camera sends the picture to the associated FTP server when matching is successful. Note: At the same time, the effective time is controlled by the schedule, and the FTP server needs to be associated first.
Mode:Time for generating and sending attendance record, there are 3 modes. day:Send the attendance record of the previous day. Week:If the time is set to Wednesday, the attendance record from last Wednesday to this Tuesday will be sent on Wednesday. Month:If the time is set to the 15 of each month, the attendance record from the15 of last...
Page 59
Display Area:Display the search results in the form of a chart in below. 8.7.4.2 Human & Vehicle Detection Human & Vehicle data statistics includes PD&VD, PID, LCD alarms. The interface of Human & Vehicle data statistics is shown as below. Figure 8.32 Time:The reference time of the search mode.
Page 60
Figure 8.33 Report Type:Data search supports four time ranges: Daily report, Weekly report, Monthly report, and Annual report. Detection Type:Set the corresponding alarm type. There are three types, For example, if the data is from the alarm triggered by Motion, it cannot be searched by other alarm types like Person or Vehicle.
Page 61
Figure 8.34-1 Report type: including day / week / quarter / year; Date: select a specific date; Start hour - end hour: sets the start and end time periods. Select the "space heat map" button and click "search", and the search results will be displayed in pictures, as shown in figure 4-4-1.
8.8 Network This menu allows you to configure network parameters such as PPPoE, DHCP and SNMP. The most common type is DHCP. In most cases, the network type is DHCP unless you manually set a static IP. If you need to authenticate the user name and password to connect to the network, please choose PPPoE.
Main Stream:After checking, you can use the main stream for multicast. Multicast Address:Set the multicast address. 8.8.1.2 PPPoE Figure 8.36 This is an advanced protocol that allows IPC to connect more directly to the network through a DSL modem. Check the "Enable PPPOE" box, and then enter the PPPoE username and password. Click "Apply"...
Figure 8.37 Enable:Enable or disable SNMP. SNMP Version:Set the version of the SNMP server. V1, V2, V1, V2 and V3 are optional. SNMP Port:Set the port of the SNMP server. Read Community:Set the Read Community value of the SNMP server. Write Community:Set the Write Community value of the SNMP server.
Client Port: This is the port that IPC will use to send information (for example, using a mobile application). If other application already uses the default port 9000, please change it. RTSP Port: The default value is 554. If other applications have already used the default port 554, please change it.
SMTP Server: Enter the SMTP server address of the e-mail. User Name: Enter your email address Password: Enter your email password Receiver 1~3: Enter the email address you want to receive event notifications from IPC. Interval: Configure the time interval between IPC notification emails. To make sure all settings are correct, click "Test Email".
8.8.4 RTSP Settings RTSP (Real Time Streaming Protocol), RFC2326, is an application layer protocol in the TCP/IP protocol system. This protocol defines how one-to-many applications can effectively transmit multimedia data through an IP network. It allows you to view real-time images through video player.
DDNS: Check to enable DDNS. Server: Select the preferred DDNS server (DDNS_3322, DYNDNS, NO_IP, some support CHANGEIP, DNSEXIT). Hostname: Enter the domain name you created on the webpage of the DDNS service provider. This is the address you type in the URL box when you want to connect to the IPC remotely via a User/Password: Enter the user name and password of the account you created.
8.8.7 IP Filter This function can set the allow list and block list of cameras. Figure 8.44 Enable:Enable or disable filter function. After enabling, allow list and block list are optional. Restricted Type:Select the list (allow list and block list) to be set. Start Address:Enter the start address.
want any old videos to be overwritten, please select OFF. If this function is disabled, please check the TF card status regularly to ensure that the TF card is not full. 8.9.2 Audio Setting This menu can set the volume of the camera. Figure 8.46 Enable Audio:Turn on/off audio.
Figure 8.47 Before enabling the cloud storage function, it is recommended to create a Dropbox account with email username and password. After creation, log in to www.dropbox.com, enter the email address and password, and click the login button after agreeing to the terms. Cloud Storage: Click to enable this function Cloud Type: Choose cloud storage type, including Dropbox and Google Drive.
8.10.1 General 8.10.1.1 Date and time Figure 8.48 Time setting mode:Time mode, there are static and NTP synchronization optional. Static time needs to be set by yourself, while NTP synchronization will perform time calibration via network. Date Format:Set the date format. Time Zone: Select the time zone related to your area or city.
8.10.1.2 Daylight Saving Time (DST) This function allows you to choose to increase DST in a specific time zone or region. Figure 8.50 Daylight Saving Time: If your time zone uses DST, please enable this option. Set by week: Select the month, specific week and time for DST to start and end. For example, at 2 AM on the first Sunday of a month.
Page 74
Figure 8.51 Figure 8.52 To change the administrator's or user's password, click the "Editing" icon. The password must be at least 8 characters and must be composed of numbers, letters and symbols. Enter the new password again to confirm. Save the new password, the system will ask you to enter the old password for authentication.
Page 75
Figure 8.53 1. Select one of the disabled users and click "Editing" icon. 2. Check "Enable" to enable the user. 3. Click "User Name" to edit user name. 4. Click the area next to Password to enter the required password. 5.
8.10.3 System Maintenance In this menu, you will be able to search and view system logs, restore factory settings, upgrade the system, export and import system parameters, and configure system’s automatic reboot. 8.10.3.1 Log Management The system log shows important system events such as motion alarms and system warnings. You can easily import the system log backup file to the computer within a set period of time.
Page 77
·configuration:IPC preview control, privacy zone setting, recording mode setting, recording plan setting, main stream setting, network setting, sub-stream setting, mail setting, color setting, motion detection setting, hard disk setting, multi-user setting, NTP settings, image control, mobile stream settings, RTSP settings, IP filter settings, factory reset, audio settings, video occlusion alarm settings, export settings and import settings.
Page 78
Figure 8.56 Select items to be restored, or click All to select all items. Click "Save" to load the default settings. 8.10.3.3 System Upgrade This menu allows to upgrade camera’s firmware. Figure 8.57 1. Put the firmware file (.sw file) on the computer hard disk. 2.
Page 79
settings file from the computer to the camera. Figure 8.58 Import Flie:Click the box, and the path window will pop up. After selecting the parameter file, click Import to start importing the parameters. Export File Name:Click the box to enter the file name of the exported parameters. Click Export to export parameters 8.10.3.5 Automatic Maintenance This menu allows the system to automatically reboot periodically.
8.10.4 System Information This menu allows you to view system information, such as camera ID, model name, MAC address, firmware version, etc. Figure 8.60 English...
9. Local Settings This menu allows you to set the save path of recording, downloading and snapshot files, as well as the format of recording and snapshot. Note: Programs without plug-ins are supported. If you use Safari 12 and above, Chrome57 and above, Firefox 52 and above, Edge 41 and other browsers for web access, this menu can be ignored.
Need help?
Do you have a question about the GU-CI Series and is the answer not in the manual?
Questions and answers