Tank - Makita DOLMAR PS-32C Repair Manual

10 TANK

1
Grip mechanism
Unscrew screw 1 and pull the lower grip half
slightly up and to the rear in the area of the
screw hole.
Note: When disassembling the throttle lever,
the following must be performed:
• Remove cover.
• Unscrew all middle screws of the damping
springs (Chapter 09).
• Remove tubular handle.
The throttle lever has a slot 2 at the hinge.
• Pull the tank and engine unit slightly apart
(being careful of the fuel lines), swing the
throttle lever up, and remove it.
• Remove the catch lever 4.
Reparaturanleitung PS-4600 / PS-5000
Repair Manual PS-32
3
2
4
In assembly, first place the throttle lever
spring 3 on the throttle lever, then push the
lever onto the hinge with the slot. The throttle
lever must be turned by 180° to do this.
The catch lever 4 can easily be pushed
through the chamfer on the seat.
The spring is engaged in the throttle lever as
shown below.
___
23