Operation - Husqvarna LB 548i Operator's Manual

Introduction
WARNING:
product, you must read and understand the
safety chapter.
Husqvarna Connect
Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product:
• Extended product information.
• Information about, and help with, product parts and
servicing.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Do the instruction steps in the Husqvarna Connect
app to connect and register the product.
Husqvarna Fleet Services
Husqvarna Fleet Services
gives the commercial fleet manager an overview
of all products. It is a requirement to have the
Husqvarna Fleet Services
product. The product is prepared for installation of
a Husqvarna Fleet Services
information about Husqvarna Fleet Services
www.husqvarna.com.
18
Before you operate the
™
™
is a cloud solution that
™
sensor installed on the
™
sensor. For more
™
, refer to

Operation

To prepare the sensor (accessory)
1. Use the sensor key to open the lid of the sensor.
2. Remove the sensor.
3. Connect the battery to the sensor. The LED light of
the sensor comes on.
4. Download the Husqvarna Fleet Services
5. Log on to the Husqvarna Fleet Services
6. Do a pairing operation. Refer to
operation between the app and the product on page
18
To do a pairing operation between the app
and the product
1. Log on to the Husqvarna Fleet Services
2. Select your product in the app.
3. Scan the code behind the sensor with your mobile
device to install the sensor in the app.
Note:
It is only necessary to do a pairing operation
between the app and the product one time.
™
app.
™
app.
To do a pairing
™
app.
1630 - 004 -