Husqvarna LB 548i Operator's Manual page 16

11. Attach battery adapter cord to the handle with the 3
fabric straps.
12. Remove the multi battery in the opposite sequence.
WARNING:
loosely to the handle. The cord can come off
the handle and cause injury.
To adjust the handle (LC 551iV)
1. Loosen the lower knobs.
2. Move the knobs to the lower end of the grooves on
the left and the right side of the product.
3. Set the handle height in one of the 2 available
positions.
16
Do not attach the cord too
4. Move the knobs up in the direction of the handle until
they stop and you hear a click.
5. Tighten the knobs fully.
To assemble the handle (LB 548i,
LB 553iV)
1. Remove the handle nut and the washer from the
plate on the upper handle.
2. Put the upper handle in position on top of the lower
handle.
CAUTION:
are not caught or become damaged.
3. Attach the washer and the handle adjustment lever.
Make sure that the wires
1630 - 004 -