Husqvarna LB 548i Operator's Manual page 23

To use the drive on the wheels (LC
551iV)
• Pull the drive bail in the direction of the handlebar to
start the drive.
• Push + and - on the control panel to set the drive
speed in 4 steps.
• Release the drive bail to disengage the drive, for
example when you go near an obstacle.
To use the drive on the wheels
(LB 553iV)
1. Start the product, refer to
page 22 .
2. Pull the drive control lever up to start the drive.
1630 - 004 -
To start the product on
3. Push + and –buttons on the control panel to set the
drive speed.
4. Push the drive control lever down to disengage the
drive, for example when you go near an obstacle.
To move the product with the cutting
equipment disengaged (LB 553iV)
• Engage the start inhibitor.
• Pull up the drive control lever.
• Hold the drive control lever and move the product.
• Let go of the drive control lever and disengage the
start inhibitor to continue the operation.
To use the SavE function
The product has a battery saving function (SavE) that
gives longer operation time.
1. Push the SavE button (A) to start the function. The
SavE symbol (B) on the display comes on.
23