Star Micronics NX-1000 User Manual page 89

( iiiucls till currcnt horizontal tab stops and sets new tab stops every
colum ns, where n is between 1 and 127.
Iloaot nil tab stops
Muilti
AM.II
ISC' " R"
h im
Resets the horizontal tab stops to their pow er-up values in which a tab
slop is set every 8 colum n starting at colum n 9. A lso clears all vertical
tab stops.
Ilntlzo ntal tab
Millttt ASCII
< H T >
llnlll
M oves the print position to the next horizontal tab stop. Ignored if there
is no next horizontal tab stop in the current line. N o te that when un­
derlining is selected, spaces skipped by horizontal tabulation are not
underlined.
Unhitive horizontal tab
Minin
ASCII
Hlil < ESC >
HIM < FS >
M oves the print p osition right or left a specified distance (m axim um 6
inches). Ignored if the resulting p osition is beyond the right or left margin.
The form ulas for the distance and direction are as follows:
is betw een 0 and 63, the print head m oves right by
\ f n 2
inches
If is betw een 64 and 127, the print head m oves left by
n 2
— 64] x 256)/120 inches
[n2
Absolute horizontal tab in inches
ASCII
Morin
< E SC >
Hnlll
Sets the next print position to
margin on the current line. Ignored if this position is beyond the right
margin. The m axim um position is 8 inches.
Decimal
27
Decimal
9
Decimal
n l n2 27
28
n l n2
Decimal
n2 27
n l
( n l + n2
Hexadecim al
82 IB
Hexadecim al
09
H exadecim al
92 n l n2 IB 5C
92
n l n 2 1C 5C
+ « 2 x 2 5 6 )/1 2 0
( n l
H exadecim al
36 IB 24
n l n2
x 256)/6<) inches from the left
n
52
n l n2
n l n2
( n l +
n l n2