i-PRO WV-QAT100 Operating Instructions

Operating Instructions
Included Installation Instructions
Inner Cover
WV-QAT100
Model No.
• Before attempting to connect or install this product, please read these instructions carefully and
save this manual for future use.
• The external appearance and other parts shown in this manual may differ from the actual product
within the scope that will not interfere with normal use due to improvement of the product.
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting
from failures arising out of improper installation or operation inconsistent with this
documentation.
"<Control No.: C****>" used in these documents should be used to search for information
on our technical information website (https://i-pro.com/global/en/surveillance/training-
support/support/technical-information) and will guide you to the right information.
i-PRO Co., Ltd.
https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
Installation
Remove the side covers from the camera main body.
Step 1
(Both the left and right sides)
Step 2
„ Attach the inner cover.
„
Ns0522-0
Printed in China
Click feeling A click sound
is heard.
Preface
This product is the inner cover for network camera. This product is designed to be used to reduce
reflected image on the dome section of the network camera.
The latest information about the supported cameras
<Control No.: C0501>
Specifications
Ambient operating temperature: –10 °C - +50 °C {14 °F to +122 °F}
Dimensions: ø117 mm x 78 mm (H)
{ø4-19/32 inches x 3-1/16 inches (H)}
Approx. 30 g {0.07 lbs}
Mass:
Finish: ABS+PC resin, mat black
Standard Accessories
Operating Instructions (this document) ....... 1 pc.
Caution:
• Before attempting to connect or operate this product, please read these instructions carefully.
Precautions
„ Refer installation work to the dealer.
„
Installation work requires technique and experience. Failure to observe this may cause fire, electric
shock, injury, or damage to the product.
Be sure to consult the dealer.
„ Do not attach the inner cover while the camera main body is kept installed
„
Failure to observe this may cause a drop resulting in injury or accidents.
„ Remove the inner cover.
„
Release the claws on the inner surface on both the left and right sides one by one and
then remove the inner cover.
Claws on the
inner surface