Extreme marquees SINGLE POLE STAR SHADE Instructions & Care

BEFORE YOU BEGIN
ATTENTION: Read instructions
carefully before use.
Recommended setup procedures are
outlined in this document.
For safety reasons it is recommended
that at least four people are to assist
in the set-up and pack-down on Star
Shades.
Ensure the area is free from any sharp
objects, overhead structures or other
obstructions.
WARNING: Keep clear of
overhead power lines.
SIZES: 6m | 8m | 10m | 12m | 14m | 16m
CONTENTS
WHAT YOU'LL NEED
PARTS LIST
MAPPING FOOT PLATES
SETUP INSTRUCTIONS
THINGS YOU SHOULD KNOW
Your Star Shade is supplied with 6 steel stakes.
These MUST always be hammered into the
gound to secure the Star Shade. The pole
turn levers are to be used to tension the roof
and tighten the roof fabric. These security
methods will maximise safety. However, due to
the unpredictable nature of weather, damage
prevention is not guaranteed.
All Star Shades are considered temporary
structures and MUST be packed down
and stowed away during adverse weather
conditions such as heavy rain, strong winds or
other storm events.
Prolonged exposure to the sun can seriously
degrade the material and/or cause it to
become discoloured.
1 ELEVATION
1 PACK DOWN
2
STEEL PIN REMOVAL
3
SINGLE POLE
STAR SHADE
WARNING: KEEP ALL FLAME
AND HEAT SOURCES AWAY
FROM THE TENT FABRIC.
This tent meets the flammability
requirements of CPAI-84. The fabric
may burn if left in continuous contact
with any flame source. The application
of any foreign substance to the tent
fabric may render the flame-resistant
properties ineffective.
THIS PRODUCT MEETS AUSTRALIAN
STANDARDS
Please check with your local
regulations prior to purchasing this
item. Some municipalities have
restrictions and requirements.
4
5
6