Step 1-Install the Device Laptop Mobile Phone Wi-Fi Laptop RJ-45 RJ-45 Modem Network Cable Jack Power Outlet...
Page 3
Step 2-Add the Router Download and install ZLife Lite. For iOS, download ZLife Lite on App Store. For Android, download it on Google Play. Tap Add device.
Page 4
Tap Wi-Fi Router. Connect the WAN port of the router to the broadband port. Tap Next.
Page 5
Scan the QR code found at the bottom of the router. If no QR code is present, enter your wireless account and password. NOTE: If the operating system of your mobile phone is Android, you must connect to Wi-Fi manually after scanning the QR code.
Page 6
After the router is added successfully, the Con gure network screen is displayed. Tap Bind immediately. After the router is added successfully, the indicator is green and steady. LED indicator/WPS NOTE: To perform more advanced con gurations, go to the web page for router management.
Page 7
Step 3- Set Up a Mesh Network NOTE: Step 3 is required only if you want to deploy multiple Z1320 routers. Method 1: Use ZLife Lite app for connection 1. Make sure the router you have just con gured is connected to the Internet.
Troubleshooting The Power indicator on the front panel is o after the power button is pressed. Power switch does not turn on. The power adapter is not correctly connected to the device. Be sure to use the power adapter supplied with the device. Unable to connect to the network.
Page 9
3. Enter the username and password (initial username: admin, initial password: ZTE_Dipper), and click Login. 4. On the main page of the Z1320, select Management & Diagnosis >Work Mode to open the Work Mode page. 5. Select Repeater from the Mode drop-down menu and click Apply.
Page 10
WPS key mode, perform the following opera- tions: On the main page of the Z1320, select Local Network> WLAN >WLAN Discovery > WLAN Discovery to open the WLAN Discovery page.
Need help?
Do you have a question about the Z1320 and is the answer not in the manual?
Questions and answers
ME I CONNECT Z1320 WITHOUT WIRE TO MODEM