Advertisement
Option 2) Cut the jack part of the MAP307 (Power supply) and strip the 2
wires. Solder or use butt connectors to connect the red wire to controller to
red wire of jack. Solder or use butt connectors to connect the black wire to
controller to black wire of jack. Then plug the jack into the monitor.
Option 3) Attach MAP302 (Power Cord) and MAP307 (Power Supply).
Connect the jack to the Monitor. Plug in MAP302 to an AC Wall Outlet.
Step #11) Before Mounting the HMI back into the machine. Turn On power
and Main Power to test the Monitor. If Video is on use the User Guide to
Adjust the Screen. Then mount the HMI back into the machine.
Enjoy your rejuvenated display!!! From the Monitech Family we
thank you for business.
M20A03-ML080QT8520MS
Red is 12 VDC. Cut the
connector off it strip the wire
then use a crimp to attach to
the red wire on MAP323
Black is 0 VDC. Cut the
connector off it strip the wire
then use a crimp to attach to
the Black wire on MAP323
MAP307
MAP302
7
Advertisement
