Advertisement
REMOVAL:
Step #1) Turn off turn off main power, turn off machine.
Step #2) On the front of your machine, remove the screws holding the HMI
in place. Take out the HMI and keep the screws for re-installation. You will
have to unplug the video cable and the other cables to take out the HMI.
Please take a picture of your connection so you know where they go for re-
installation.
Step #3) This is what you got. Unscrew the fasteners holding the CRT
Frame to the HMI, keep the screws for re-installation. Unplug the power
connector from the board. An unscrew to the ground wire from the frame,
screw the power supply ground back in. After this take out the CRT Frame
from the HMI.
Screw to remove to
free the CRT frame
from the HMI
M20A03-ML080QT8520MS
Unplug the
monitor power
from the board.
To see the CRT
and controller you
must remove the
unscrewing the
screws hold it.
Unscrew the ground
wire from the board.
Re-attach the power
supply ground.
back panel by
3
Advertisement
