Table of Contents
Advertisement
ALEXA 35 Housing Setup
ALEXA 35 Camera Preparation
✓ Camera Basics. Strip down the ALEXA 35 to the bare camera body. Remove
the following items:
✓ Antenna
✓ Camera Lens
The only items remaining are camera, B-mount adapter, and battery (CORE-SWX
HELIX shown).
GPB-1 Module Preparation
✓ Remove the GPB-1 Module's threaded standoffs and replace with the supplied 4-
40 x 5/16" pan head screws as shown below. This will allow the module to be
properly seated in the housing carrier.
Remove the standoffs.
✓ Any additional mounts or brackets
ALEXA 35
Replace with supplied
4-40 x 5/16" pan
head screws.
Page 13
Advertisement
Table of Contents
