Table of Contents
Advertisement
Introducing the ALEXA 35 Housing
Unpacking ALEXA 35 Housing
After removing the ALEXA 35 Housing from its shipping container, carefully inpsect it for
mssing parts or damage that may have occurred in shipment. If you discover
discrepancies, contact Gates or your Gates dealer.
✓ ALEXA 35 Underwater
Housing.
✓ Port(s) of choice. 8 or 10 in
Dome Port, either glass or
acrylic, or FP80 Flat Port.
✓ Stackable Port Ring(s) of
choice SPR80 or SPR110 size.
✓ Camera Dovetail Mount.
✓ Lens Gear Drives (2x
Clockwise and 1x Counter
Clockwise).
✓ Universal set of Guide Bars
and drive shafts.
✓ Hard Sided Rolling Case(s).
✓ Seal Check system.
Optional Parts
✓ HD-SDI surface feed bulkhead
connector and cable.
✓ Lens Gear Knob Extensions.
✓ Light System.
✓ Tripod Adapters.
✓ Crane Mounts.
✓ Comm. Input.
✓ Tool Kit with case.
✓ Various assembly and spare
parts for the ALEXA 35
Housing including bolts and set
screws.
✓ Spare O-Ring Kit.
✓ Lanyard Handle.
✓ Lanyard Mounts.
✓ Trim Weights (quantity
dependent on configuration).
✓ GPIO / Record Cable.
✓ Focus / Iris Silicone Marker
Rings.
✓ External Monitor Housing
System.
✓ Additional Port Ring(s) for different
size lenses and lens control
systems.
✓ Lens Control.
✓ Camera Control
✓ Surface Power
✓ Extended Battery Shell (As
needed for certain large or
stackable batteries).
Page 6
Advertisement
Table of Contents
