Monitor Mount / Video Connections - Gates ALEXA 35 Setup, Use And Care Manual

ALEXA 35 Housing Setup

Monitor Mount / Video Connections

✓ Mount the monitor housing. Secure the monitor to the top of the main shell, as
shown and tighten the thumbscrews to secure.
Slide the monitor onto the
camera housing dovetail
and tighten with
thumbscrews.
✓ Insert the Monitor Cable into the ALEXA 35 Housing. Refer to the illustration.
The External Monitor cable is a 'pass through' type that inserts into bulkhead
opening on the upper right side of the housing. Insert the cable connectors and
route to the rear of the housing to the position shown in the next illustration.
✓ Tighten the brass collar until snug.


Insert the monitor cable into the camera
housing as shown. Tighten the brass
collar until snug.
Page 26