Table of Contents
Advertisement
Setup
Camera Installation
Secure the Epic camera into Pro Action. Tighten each 3/16-18 screw lightly,
allowing slight movement of the camera on the mount. This measure will allow fine
adjustment to alignment later.
Install the camera to Pro Action housing and make all connections as outlined in
the Pro Action SU&C Guide.
Secure the RED Camera to Pro
Action with two mounting screws.
Tighten the screws until lightly
snug. The camera should move
slightly.
Page 6
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro Action and is the answer not in the manual?