Accessories - Gates ALEXA 35 Setup, Use And Care Manual

ALEXA 35 Housing Operation

Accessories

HD-SDI Surface Feed Cable (optional)
If you have the HD-SDI option installed, there are three steps:
✓ Camera connection. See the previous section
connecting the HD-SDI surface feed to the camera inside the housing.
✓ Housing Cable Connection. Refer to the photo. Connect the surface cable to the
HD-SDI bulkhead connection on the housing.
✓ Refer to the HD-SDI Addendum document for further information.
Light Bar (optional)
The Light Bar is a convenient method to mount lights forward and to the outside edges
of the housing. It accepts a wide variety of
bases. If your application requires a Light Bar, install it with the included screws as
shown below.
HD-SDI Surface Feed
cable (optional)
Note: DEEP EPIC housing
shown
Video Connections
Ultralight Controls Systems
Page 41
for details
ball mounts and