Packet Data; Data Call; Sip Settings - Nokia N76 Manual

Select Options >
following settings:
Network type—Select the internet protocol type to use:
IPv4 or IPv6. The other settings depend on the selected
network type.
Phone IP address
your device.
DNS address—In
address of the primary DNS server. In
address, enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Proxy server address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.

Packet data

The packet data settings affect all access points using a
packet data connection.
Packet data connection—If you select
and you are in a network that supports packet data, the
device registers to the packet data network. Starting an
active packet data connection (for example, to send and
receive e-mail) is quicker. If there is no packet data
coverage, the device periodically tries to establish a
108 Copyright © 2007 Nokia. All rights reserved.
Advanced settings to change the
(for IPv4 only)—Enter the IP address of
Primary DNS address, enter the IP
Secondary DNS
When available
packet data connection. If you select
device uses a packet data connection only if you start an
application or action that needs it.
Access point—The access point name is needed to use your
device as a packet data modem to your computer.

Data call

The data call settings affect all access points using a GSM
data call connection.
Online time—Set the data calls to automatically
disconnect after a time-out if there is no activity. To enter
a time-out, select User defined, and enter the time in
minutes. if you select Unlimited, data calls are not
automatically disconnected.

SIP settings

SIP (session initiation protocol) settings are needed for
certain network services using SIP, such as video sharing.
You may receive the settings in a special text message
from your service provider. You can view, delete, or create
these setting profiles in SIP
When needed, the
settings.