Add Ringing Tones For Contacts; Create Contact Groups; Remove Members From A Group - Nokia N76 Manual

packet data connection. In this case, the message center
number and the recipient's phone number must be
included on the fixed dialing list.
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.

Add ringing tones for contacts

To define a ringing tone for a contact or a contact group,
do the following:
1
Press to open a contact card or go to the groups
list, and select a contact group.
2
Select Options > Ringing
opens.
3
Select the ringing tone you want to use for the
individual contact or the selected group. You can also
use a video clip as a ringing tone.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your device recognizes it).
To remove the ringing tone, select
list of ringing tones.
tone. A list of ringing tones
Default tone from the

Create contact groups

1
In Contacts, press to open the groups list.
2
Select Options > New group.
3
Write a name for the group or use the default name,
and select OK.
4
Select the group, and Options
5 Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6
Select OK to add the contacts to the group.
To rename a group, select Options
new name, and select OK.

Remove members from a group

1
In the groups list, select the group you want to modify.
2
Scroll to the contact, and select
from group.
3 Select Yes to remove the contact from the group.
Copyright © 2007 Nokia. All rights reserved.
> Add members.
to mark it. To add
> Rename, enter the
Options > Remove
91