Call Waiting; Log; Call Duration; Packet Data - Nokia N76 Manual

screen with a still image captured by the camera in your
device, see 'Call',
To end the video call, press

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings > Phone
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press
calls, select Options

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
Log > Recent calls. The device registers missed and
received calls only if the network supports these
functions, the device is switched on, and within the
network service area.
86 Copyright © 2007 Nokia. All rights reserved.
Image in video call, p. 104.
.
Call waiting in
> Call > Call waiting (network service).
. The first call is put
Options
. To end both
> End all calls.
, and select Tools
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press

Call duration

Tools >
To monitor the approximate duration of your incoming and
outgoing calls, press
duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
>
To clear call duration timers, select
timers. For this you need the lock code. See
SIM card', p. 101.

Packet data

To check the amount of data sent and received during
>
packet data connections, press
Log > Packet
your packet data connections by the amount of data sent
and received.
Options
list. To clear an individual event, open a
.
, and select Tools
Options
, and select
data. For example, you may be charged for
> Clear recent
> Log > Call
> Clear
'Phone and
Tools >