Five Call Tone Settings; Roger Beep Confirmation Tone; To Change A Call Tone Setting; To Turn Roger Beep On Or Off - Cobra microTALK PR 260 WX Owner's Manual

Introduction

Five Call Tone Settings

You can choose between five different Call Tone Settings to
transmit a call alert.
Mode/Power
Call Tone Setting
Channel Button

Roger Beep Confirmation Tone

Your listener will hear an audible tone when you release the
Talk button. This alerts the other party that you are finished
talking and it is OK for them to speak.
Mode/Power
Roger Beep Off
Channel Button
Operation

To change a call tone setting:

1. Press the Mode/Power button until the
letter "C" and the current call tone number
(01 through 05) is displayed. The current
call tone will sound for one second.
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to
enter the new setting and proceed
to other functions.
b. Press the Lock button to enter the new
setting and return to Standby mode.

To turn roger beep on or off:

1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and return to Standby mode.
b. Press the Lock button to enter the new
setting and return to Standby mode.
Customer Assistance Warranty
•
•
13