To Set Vox Sensitivity; Channel Scan - Cobra microTALK PR 260 WX Owner's Manual

Introduction
Mode/Power
VOX Sensitivity Level
Channel Button

Channel Scan

Your microTALK
Mode/Power
Scan Channels
Channel Button
While setting channel scan, if you do not press any buttons for 15 seconds
your radio will automatically return to Standby mode on the channel or
channel/privacy code displayed before you entered mode functions.
Operation

To Set VOX Sensitivity:

1. Press the Mode/Power button until the VOX
icon flashes and the current sensitivity level
is displayed.
The current VOX sensitivity level is
displayed with letters "LE" and a Number
1 through 5, with Number 5 being the
most sensitive level and Number 1
being the least sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one (1) of the following:
a. Press the Mode/Power button to enter
the selected setting and proceed to other
functions.
b. Press the Lock button to enter the selected
setting and return to Standby mode.
® radio can automatically scan channels.
To scan channels:
1. Press the Mode/Power button until the
Scan icon and the channel numbers appear
on the display.
2. Press the Channel Up or Channel Down button
to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
The Scan icon will continue to be displayed
when scan is on. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
Customer Assistance Warranty
•
9