Privacy Code Scan - Cobra microTALK PR 260 WX Owner's Manual

Introduction

Privacy Code Scan

Your microTALK
(00 through 38) within one channel.
Select Channel
Mode/Power
Scan Privacy Codes
Channel Button
Operation
® radio can automatically scan the Privacy Codes
To scan privacy codes:
1. While in Standby mode, press the
Channel Up or Channel Down button
to choose the channel on which you
wish to scan privacy codes.
2. Press the Mode/Power button until
the Scan icon and the privacy code
numbers appear on the display.
3. Press the Channel Up or Channel Down
button to begin scanning privacy codes
within the channel you selected.
The Scan icon will continue to be displayed
when privacy code scan is on. Your radio will
continue to scan privacy codes and stop as an
incoming transmission is detected. Your radio
will remain on that channel/privacy code for
10 seconds.
While setting privacy code scan, if you do not
press any buttons for 15 seconds your radio
will automatically return to Standby mode on
the channel/privacy code that was displayed
before you entered mode functions.
Customer Assistance Warranty
•
11