Turning On; Battery Low; Auto Battery Save; Communicating With Another Person - Cobra microTALK PR 260 WX Owner's Manual

Introduction
Mode/Power

Battery Low

Battery Save Mode
Talk Button
Two Inches (5 cm)
from Mouth
Operation
Turning on Your microTALK
Press and hold the Mode/Power button until you
hear a series of audible tones indicating the radio
is on.
Your microTALK
ready to receive transmissions. The radio is
always in Standby mode except when the Talk,
Call or Mode/Power buttons are pressed.
Battery Low
When battery power is low, the Battery Low icon
will blink. Your batteries should be replaced or
recharged, if using rechargeable batteries.

Auto Battery Save

If there are no transmissions within 10 seconds,
the radio will automatically switch to Battery
Save mode and the Power Saver icon will flash
in the display. This will not affect the radio's
ability to receive incoming transmissions.

Communicating with Another Person

1. Press and hold the Talk button.
2. With the microphone about two inches
(5 cm) from your mouth, speak in a
normal voice.
3. Release the Talk button when you are
finished talking and listen for a response.
You cannot receive incoming calls while
pressing the Talk button.
Both radios must be tuned to the
same channel to communicate.
Customer Assistance Warranty
® radio is now in Standby mode,
® Radio
•
•
•
•
3