Table of Contents
Advertisement
16
www.electrolux.com
9.2 The dishwashing and drying results are not satisfactory
Problem
The dishes are not clean.
Scale particles on the
dishes.
There are streaks or milky
stains on glasses and
dishes.
There are bluish layers on
glasses and dishes.
The dishes are wet and
dull.
Possible cause
The selected programme
was not applicable for the
type of load and / or for the
degree of soil.
The basket was not loaded
correctly, water did not
reach all surfaces.
The spray arm could not
turn freely because of the
incorrect arrangement of
the load.
The filters are clogged.
The filters are not correctly
assembled and installed.
The quantity of detergent
was not enough or no de‐
tergent was used.
The salt container is emp‐
ty.
The cap of the salt contain‐
er is not closed correctly.
The level of the water soft‐
ener is too high.
The rinse aid dosage is too
high.
The detergent can be the
cause.
A programme without a
drying phase has been se‐
lected.
The rinse aid dispenser is
empty.
Possible solution
Make sure that the pro‐
gramme is suitable to the
type of load and / or for the
degree of soil.
Load the basket correctly.
Make sure that the spray
arm can turn freely before
you start a programme.
Make sure that the filters
are clean.
Make sure that the filters
are correctly assembled
and installed.
Make sure that a correct
amount of detergent is
used.
Fill the salt container with
specific salt for dishwash‐
ers.
Make sure that the salt
container is correctly
closed.
Set the water softener to a
lower level.
Set the rinse aid dispenser
to a lower position.
Try a different brand of de‐
tergent.
Set a programme with a
drying phase.
Fill the rinse aid dispenser
with rinse aid.
Advertisement
Table of Contents
