Electrolux ESL 2435 Instruction Book

Electrolux instruction book dishwasher esl 2435
Hide thumbs Also See for ESL 2435:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux ESL 2435

  • Page 2: Table Of Contents

    - Starting the programme - Interrupting the programme temporarily - Cancelling the programme - Pause function - Cancelling the drying phase - Switching the dishwasher off Maintenance and cleaning Something Not Working Service - Service and Spare Parts - Customer Care Department...
  • Page 3: Safety Information

    Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety.
  • Page 4: Description Of The Appliance

    Description of the appliance - 4 -...
  • Page 5: Spray Arm

    4. Close the lid and press until it locks again. Do not fill the rinse aid dispenser with liquid detergent. Electrolux recommends the use of Finish dish- washer detergent and Rinse Aid. Water softener (6) This dishwasher is equipped with a water softener for hard water.
  • Page 6: The Control Panel

    The control panel On/Off button Combination buttons ”A” In addition to selecting a programme, you can by pressing these two buttons adjust the setting of the water softener, switch off the buzzer and cancel a programme in progress. Control lamps: Shows that •...
  • Page 7: Adjusting The Water Softener

    2) millimol, internationel unit for water hardness *) factory setting In the following settings the dishwasher must be switched off and all programmes completed. See chapter ”Using the appliance” for information on how to complete the programme. 1. Press in the On/Off button.
  • Page 8: Programme Chart

    Programme chart Type of Plates and dishes cooking pots • heavily Type of soil: soiled • dried-on food remnants especially egg- white and starch Suitable programme: INTENSIVE 70° C Pre-wash Programme- cycle: 1) Washing 2 x rinses Final rinse Drying Consumption figures: 2) Washing...
  • Page 9: Loading And Unloading

    Loading and unloading the dishwasher How to load the dishes The illustration shows the dishwasher loaded with six place settings. Your own dishes are not likely to be identical to this load, but if you follow the advice below we are sure you will be pleased with the results.
  • Page 10: Using The Appliance

    3. Release the buttons. The programme is now cancelled and a new programme can be selected. If you switch the dishwasher off with the On/Off button, the selected programme is not finished, it is only disrupted. When you start the dishwasher again, the programme will continue.
  • Page 11: Maintenance And Cleaning

    There are two filters, a coarse one and a fine one which should be cleaned after every wash. Lift out these filters which are in the base of the dishwasher and wash under running water. The dishwasher must not be used without the filters.
  • Page 12: Something Not Working

    • This is not a fault, try another brand of detergent. • Is the rinse aid dispenser empty or adjusted to too low dosage? • Have the dishes been left too long inside the dishwasher? • Is the dishwasher level? Check •...
  • Page 13: Service

    Customer Care Department For general enquiries concerning your Electrolux appliance or for further information on Electrolux products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.electrolux.co.uk...
  • Page 14: Guarantee Conditions

    Standard guarantee conditions We, Electrolux, undertake that if within 12 months from the date of the purchase this ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: •...
  • Page 15: Technical Specifications

    Installation instructions Any electrical work required to install this appliance, should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance, should be carried out by a qualified plumber or competent person. Technical specifications Capacity: Dimensions:...
  • Page 16: Unpacking

    – Hinges 2x (10) – Plastic bag with screws, washers and spacers This dishwasher is designed solely for washing household utensils suitable for washing in a dishwasher. Using it for other purposes may damage it and invalidate the guarantee. - 16 -...
  • Page 17: Installation

    Make sure that the shelf for the dishwasher is properly secured inside the cupboard. The cupboard must be secured properly onto the wall and the front edge of the shelf must be level with the sides of the cupboard.
  • Page 18: Preparing The Outer Door

    Screw the guide rods and hinges on the door into place using the predrilled holes. Mount plate Before installing the dishwasher and adjusting the door onto the cupboard, put the mount plate into its correct position on the shelf. 1. Place the mount plate in the middle of the cup- board.
  • Page 19: Fitting The Outer Door

    Installation Fitting the outer door 1. Unscrew the screws on the mounting plate. Lift the plate off together with the door. 2. Lay the machine down on its back. Check that none of the hoses are trapped. Insert the guide rods into the plastic door guides.
  • Page 20: Installing The Dishwasher

    Installation Installing the dishwasher 1. Put the dishwasher into the cupboard and screw the mounting plate into position from underneath with 2 screws, with the washers between. 2. Put the spacers provided at the sides of the machine and screw the machine into place in the cupboard.
  • Page 21: Water Inlet

    We would advise you to have a shut-off valve or stop- cock in the water supply pipe close to the dishwasher and accessible for easy use. This should be turned off when the appliance is not in use. Connect the inlet hose to a tap with a 3/4"...
  • Page 22: Power Supply

    Installation Power supply The dishwasher is supplied with a lead and electrical plug for connection to a 230 V, 13 A earthed wall socket. Before any work is carried out on the dishwasher, it must be isolated from the electric mains supply, for example by removing the plug from the wall socket.
  • Page 23: Information For Test Centres

    Information for test centres The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual. Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using detergent and a clean load.

Table of Contents