2 DUT
Configuration:
The following test will use the inbuilt 802.1X authentication method such as, EAP_TLS,
PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only)
using the Smart Card or other Certificate of the Windows XP Professional.
3. DUT and Windows 2000 Radius Server Setup
3-1-1. Setup Windows 2000 RADIUS Server
We have to change authentication method to MD5_Challenge or using smart
card or other certificate on RADIUS server according to the test condition.
3-1-2. Setup DUT
•
Enable the 802.1X (check the "Enable checkbox").
•
Enter the RADIUS server IP.
•
Enter the shared key. (The key shared by the RADIUS server and DUT).
•
We will change 802.1X encryption key length to fit the variable test
condition.
3-1-3. Setup Network adapter on PC
•
Choose the IEEE802.1X as the authentication method. (Fig 2)
2 is a setting picture of Windows XP without service pack 1. If users
upgrade to service back 1, then they can't see MD5-Challenge from EAP
type list any more, but they will get a new Protected EAP (PEAP) option.
•
Choose MD5-Challenge or Smart Card or other Certificate asthe EAP type.
•
If choosing use smart card or the certificate as the EAP type, we select to
use a certificate on this computer. (Fig 3)
1.Enable DHCP server.
2.WAN setting: static IP address.
3.LAN IP address: 192.168.123.254/24.
4.Set RADIUS server IP.
5.Set RADIUS server shared key.
6.Configure WEP key and 802.1X setting.
62
Note. Figure
Need help?
Do you have a question about the WL-114v2 and is the answer not in the manual?