Table of Contents
Advertisement
Operations
Control panel
01 Cycle Panel
02 Display
03 Water Level
04 Temp.
05 Activ Dual
Wash
06 Delay End
07 Wash Time
08 Rinse Times
09 Spin Time
WA8000J_03823D-00_EN.indd 29
01
Press to select a cycle.
Displays the current cycle information and estimated time remaining,
or an information code if the washing machine needs to be checked.
Press to change the water level manually.
Press to toggle between two different water temperature options.
• Cold: For brightly colored, very lightly soiled items.
• Hot: For colorfast items.
This button provides two options, and is available only when the
washing machine is stopped or in standby.
•
Water Save (default): Select to reuse water remaining in the tub
after using Water Jet. The water will be used for the main cycle.
•
Drain: Select to drain water that remains after using Water Jet.
When draining is complete, the washing machine switches to
Water Save mode automatically.
Press to finish the wash at a specified time. To cancel the Delay End
settings, simply turn off the washing machine. You can set the Delay
End time up to 24 hours.
Press to adjust the wash time between 6 to 30 minutes or press to
start wash cycle only. (The available range of the wash time differs,
depending on the model.)
Press to change the number of rinses (maximum 5 rinses) or press to
start rinse cycle only.
Press to adjust the spin time between 1 to 9 minutes or press to
start spin cycle only. (The available range of the spin time differs,
depending on the course.)
02
03
04
05
06
10
07
11
08
09
English 29
4/28/2017 12:32:00 PM
Advertisement
Table of Contents
