Contents Safety information What you need to know about the safety instructions Important safety symbols Important safety precautions Installation Unpacking your washer Overview of your washer Basic location requirements Important note to installer Step-by-step installation Operating instructions Loading your washer Getting started Washing a load of laundry Control panel...
Page 3
Specifications Fabric care chart Helping the environment Specification sheet Cycle chart English 3 WA8700J_WA10J8700GP-03520B-03_SA.indd 3 2015/7/25 11:29:18...
Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features.
These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it.
Page 6
Safety information If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This appliance should be positioned so that the power plug, the water supply taps, and the drain pipes are accessible.
Page 7
Plug the power cord into an AC 220-240 V / 50 Hz wall socket or higher and use the socket for this appliance only. Never use an extension cord. • Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
Page 8
• Failure to do so may result in electric shock. If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest Samsung Customer Service. • Failure to do so may result in electric shock or fire.
Page 9
Using the product for business purposes qualifies as a product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.
Page 10
Safety information Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use the strong acid cleaning agent. Before cleaning or performing maintenance, unplug the appliance from the wall socket. • Failure to do so may result in electric shock or fire. 10 English WA8700J_WA10J8700GP-03520B-03_SA.indd 10 2015/7/25 11:29:19...
Installation Follow these instructions carefully to ensure proper installation of the washer and to prevent accidents when using it. Unpacking your washer Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below. If your washer was damaged during shipping, or you do not have all of the items, contact 1300-362-603.
Installation Overview of your washer Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. 12 English WA8700J_WA10J8700GP-03520B-03_SA.indd 12...
Page 13
Flat screwdriver Leveller NOTE • If you lose an accessory and want to purchase a replacement, contact the Samsung service center 1300 362 603. • The design of the parts and accessories may differ from the pictures above. Their design is subject to change without notice for product improvement.
Installation Basic location requirements Electrical WARNING • 220-240 Volt 50 Hz fuse or circuit An improperly connected equipment- breaker. grounding conductor can increase the risk • Individual branch circuit serving only of electrical shock. Check with a qualified your Washer is recommended. electrician or serviceman if you are not sure • Your washer is equipped with a power whether the appliance is properly grounded.
The water faucets must be within 4 feet Never install your washer on a platform or (122 cm) to the back of your Washer to weakly supported structure. match the inlet hoses provided with your Location considerations Washer. Do not install your washer in areas where NOTE water may freeze, since your washer will Accessory inlet hoses are available in...
Page 16
Installation Recessed area Side view - closet or confined area 1 in (2.5 cm) 21 in (53.3 cm) 27.0 in (68.6 cm) 2 in (5.1 cm) 29.3 in (74.4 cm) 6 in (15.2 cm) Gap between end of water valve and the wall • Case 1.
Required dimensions for Installation 59.8 in (152.0 cm) 27.0 in (68.6 cm) 39.2 in (99.5 cm) 45.7 in (116.0 cm) 48.0 in (310.0 cm 24.0 in (155.0 cm 3.0 in (7.6 cm) 29.3 in (74.4 cm) NOTE 45.7 in (116.0 cm) * Required spacing English 17 WA8700J_WA10J8700GP-03520B-03_SA.indd 17...
Installation Important note to installer Please read the following instructions carefully before installing your washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer. Installation flow chart Removing the Selecting a shipping bolts Connecting the Adjusting the...
Page 19
STEP 2 Connecting the water supply hose CAUTION Before installing the water supply hoses, make sure there are rubber gaskets (B) inside the couplings (A) at both ends of each new water hose. Installing the water supply hoses without rubber gaskets can cause water leakage.
Page 20
Installation 1. Connect the ends of the water supply hoses to the hot (B) and cold (A) faucets. 2. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a wrench.
Page 21
4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake.
Page 22
Installation STEP 3 Connecting the drain hose The end of the drain hose can be positioned in three ways: Over the edge of a wash basin Secure the hose guide (A) to the side of the basin wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
Page 23
NOTE Connect the hose guide (A) within 4 in (10 cm)* from the end of the drain hose. If the drain hose is extended more than 4 in (10 cm) beyond the end of the hose guide, mold or microorganisms could spread to the inside of the washer.
Page 24
Installation 3. If the washer is level, the pulsator (A) is positioned at the center of the water as shown in the figure. If not, level your washer by turning the front leveling feet clockwise or counterclockwise as necessary. NOTE Turn the front leveling feet clockwise (B) to lower the washer, and counterclockwise (C) to raise the washer.
Page 25
4 Leveling your washer” section on page 23 for instructions. STEP 7 Calibration Mode Your Samsung washer detects the laundry weight automatically. For more accurate weight detection, please run Calibration Mode after the installation. To run Calibration Mode, follow these steps: 1.
Operating instructions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Loading your washer • Fill the tub with dry, unfolded clothes evenly around in order to enhance washing efficiency and prevent excess wear, or wrinkling of the load.
Getting started 1. Load your washer. 2. Add liquid (or powder) detergent and additives to the dispenser (see the "Detergent use" section on page 39). 3. Select the appropriate cycle and options for the load (see the "Washing a load of laundry" section page 28).
Washing a load of laundry WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Control panel Turn the Cycle Selector to select the desired cycle. The indicator by 01 Cycle Selector the cycle name lights up.
Page 29
This button provides two options, and is available only when the washing machine is stopped or in Standby state. • Water Save (default): Reuse water in the tub that remains 07 Activ Dual after using Water Jet. The water will be used for the main cycle. Wash Drain •...
Washing a load of laundry Cycle overview Cycle Description Suitable for a averagely soiled cotton load. For cottons, bed linens, table linens, underwear, towels, or shirts. COTTON The washing time and the number of rinse cycles are automatically adjusted according to the load. This cycle minimizes noise for night washes by decreasing the SILENT spinning power of the product.
Cycle Description For bulky items such as blankets and sheets. When you are BEDDING washing comforters, use liquid detergent. SPIN Drains the water and spins at a high speed. Use for loads that need rinsing only or to add rinse-added RINSE + SPIN fabric softener to a load.
Page 32
Washing a load of laundry • To cancel the “dC” mode, deactivate NOTE the Child Lock function. To deactivate Adding laundry when Child Lock is on the Child Lock function, press and To add laundry, deactivate the Child Lock hold Water Level and Power Wash function.
Page 33
Garment Plus PowerJet™ Plus You can add or take out laundry items even After supplying additional water, the drum after the wash has started, as long as the rotation creates a waterfall that dissolves Garment Plus indicator is on. Pressing the detergent thoroughly.
NOTE occurs. Downloading the Smart Check app • Download the Samsung Laundry App NOTE into your mobile phone from the The error code history is deleted after you Android market or Apple App store.
Page 35
4. Add liquid (or powder) detergent, When the cycle is finished: softener, and/or bleach (if necessary) to After the total cycle has finished, the power the appropriate compartments. See the will turn off automatically. "Detergent use" section on page 39. 1.
Washing a load of laundry ATC (Auto Temperature Control) ATC is the control function that the washer controls water temperature with temperature sensor (thermistor). NOTE Because there are numerous water temperatures depending on the customer’s environments (cold areas, warm areas, various water temperatures, settings of heater temperature, etc.), ATC function in our washer maintains the certain level of wash...
The basics Prewash (Water Jet & Built-in sink) Water Jet and Built-in sink help you handwash before the washing machine starts operation. Water Jet is available only when the door is open with the water level set to less than High. For prewashing, use the Built-in sink that is designed to facilitate the hand-wash.
Page 38
Washing a load of laundry [Water Jet drains] • Select a cycle and press Start/Pause. Then the washing machine drains the water to be used during the prewash. • When the washing machine is turned off before starting the wash cycle, it drains the water to be used during the prewash.
Detergent use • The use a good quality top loader detergent is recommended. • It is also important to: Pre–treat stains before washing. Sort clothes by color. Sort clothes by the amount of soiling. Avoid overloading. NOTE • When using powdered detergent it is recommended that the powder be dissolved in warm water to ensure optimum cleaning results.
Washing a load of laundry Features Automatic dispenser Your washer has separate compartments for dispensing detergent and color-safe bleach and fabric softener. Add all laundry additives to their respective compartments before starting your washer. The automatic dispenser must always be in place before you start your washer. DO NOT open the automatic dispenser when your washer is running.
Page 41
Loading the Liquid (or Powder) detergent compartment 1. Pour the recommended amount of laundry detergent directly into the detergent compartment before starting your washer. 2. If you are using color-safe bleach, add it with the detergent to the detergent compartment. NOTE When adding color-safe bleach with detergent, it is best if both laundry products...
Page 42
Washing a load of laundry Loading the fabric softener compartment 1. Pour the recommended amount of liquid fabric softener into the softener compartment (C). For smaller loads, use less than one capful. 2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment.
Maintaining your washer Cleaning the exterior 1. Turn off the water faucets after finishing 2. Use a soft cloth to wipe up all detergent, the day’s washing. bleach or other spills as they occur. This will shut off the water supply to 3.
Maintaining your washer Preserving the top cover and the front frame Do not place any heavy or sharp objects or NOTE a detergent box on the washer. They can Since the entire washer has a high-gloss scratch or damage the top cover of the unit. finish, the surface can be scratched or damaged.
Cleaning the dispensers The automatic dispenser may need to be cleaned periodically due to laundry additive buildup. 1. Pull the dispenser drawer straight back until it stops. 2. Push the ends of each side of the case at the same time. When you feel the ends push, pull out the dispenser drawer.
Page 46
Maintaining your washer 4. To clean the drawer opening, use a small, non-metal brush to clean the recess. Remove all residue from the upper and lower parts of the recess. 5. Return the inserts to the proper compartments and replace the drawer by placing the dispenser drawer rail (B) on top of the compartment rail (A) (Tilt the dispenser drawer downward and...
Tub clean TUB CLEAN is a self-cleaning cycle that removes mold that may occur inside the washer. 1. Press Power. 2. Select TUB CLEAN. Once TUB CLEAN is selected, the only function that can be set is Delay End. 3. Press Start/Pause. TUB CLEAN begins.
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Action • Make sure you use rated power for the product. Does not turn on. • Make sure the power cord is completely plugged in. • Check the fuse or reset the circuit breaker.
Page 49
Problem Action • Make sure the washing machine is set on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. • Make sure the washing machine is not contacting any other object.
Page 50
Troubleshooting Problem Action • Fully open both water taps. • Make sure the temperature selection is correct. • Make sure the hoses are connected to the correct water taps. Flush water lines. • Disconnect the hoses and clean the screens. The hose filter screens may be clogged.
Page 51
Problem Action • Make sure all hose connections are tight. • Make sure the water supply hose's rubber packing is in the correct position. Screw tightly again. • Make sure the end of the drain hose is correctly inserted and secured to the drain system.
Troubleshooting If a problem persists, contact a local Samsung service center. Information codes The washer may display information codes to help you understand what is occurring with your washer better. Code Action The WaterLevel sensor is not working properly. • Check WaterLevel Sensor wire harness.
Page 53
Code Action Water is not draining. • Make sure the drain hose is not frozen or clogged. • Make sure the drain hose is positioned correctly, depending on the connection type. • Clean the debris filter as it may be clogged. •...
Page 54
Water is overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre. When position of the clutch can't be detected. • If the information code remains, contact a customer service centre.
Specifications Fabric care chart The following symbols provide garment care The clothes washer can not ensure direction. The clothing care labels include these temperatures because the actual symbols for drying, bleaching, drying and temperature of the water entering your ironing, or dry cleaning when necessary. The washer depends on water heater settings use of symbols ensures consistency among and regional water supply temperatures.
Page 56
Specifications Heat setting Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Any heat Drip dry No heat / Air Dry flat Iron dry or steam temperatures High Medium Warning symbols for laundering Do not wash Do not wring Do not bleach Do not tumble dry...
Helping the environment • Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the lid so that animals and small children cannot get trapped inside the appliance.
Specifications Specification sheet Type Top loading washer A. Height 45.7 (116.0) B. Width 27.0 (68.6) Dimensions (inches (cm)) C. Height with lid open 59.8 (152.0) D. Depth 29.3 (74.4) Capacity (kg) 10.0 Water pressure (psi (kPa)) 20 - 116 (137 - 800) NET weight (kg (lb)) 65 (143.3) 220 V...
Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting Water Level Power Wash Temp. : factory setting H: High H: Hot : can be selected M: Medium W: Warm L: Low C: Cold Water Level Power Wash Temp.
Page 62
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 www.samsung.com/au/support DC68-03520B-03 WA8700J_WA10J8700GP-03520B-03_SA.indd 62 2015/7/25 11:29:36...