Delay End
You can set the washing machine to finish a cycle later. The hour displayed indicates the time
the wash will finish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press START/PAUSE. The lamp indicator next to the Delay End button turns on, and the
timer starts.
4. To cancel Delay End, restart the washing machine by pressing POWER.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do this, add the Delay End option
to the current cycle with a 3-hour setting, and then press START/PAUSE at 2:00 p.m. The
washing machine starts operating at 3:00 p.m. and ends at 5:00 p.m. Provided below is the
timeline for this example.
2:00 pm
Set the Delay End to 3 hours
Soak
Use Soak if the laundry is heavily contaminated or stained. Soak improves the wash
performance by adding a soak cycle.
•
Soak adds 20 minutes to the cycle time.
•
When Soak is complete, the wash cycle starts without draining water.
Sound
To turn the sound on or off, press Water Level for 3 seconds.
•
You can turn the sound on or off for all cycles.
•
When the sound is off,
WA8000J_03823D-00_EN.indd 33
turns on.
3:00 pm
Start
5:00 pm
End
English 33
4/28/2017 12:32:01 PM